Home » Home DIY Repair » Washing Machine Repair » Bosch Washing Machine Error Fault Codes

Bosch Washing Machine Error Fault Codes

Here is information that will assist you in identifying what may be making your Bosch washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Bosch specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

Bosch Washing Machine Error Codes

BOSCH Washing Machine Error/Fault Codes – Probable Fault Identifiers

Bosch Logixx WAS Series Washing Machine Error Codes

F16
Door lock error

F17
Inlet valve error detected

F18
Drain error detected

F23
Anti flood device has been activated

F34
Door lock error

F42
Motor fault

F43
Motor fault

F44
Motor fault

Bosch WAE Range Washing Machine Fault Codes

F16
Door lock problem

F17
Inlet valve

F18
Drain pump

F21
Motor

F23
Anti flood system activated

Bosch WFP Range Washing Machine Fault Codes

F01
Water intake timeout

F02
Heating timeout

F03
Draining timeout

F04
Motor fault

F05
Uncontrolled motor startup

F06
Short on NTC Detected on hot water intake

F07
Open circuit NTC Open circuit wiring

F08
Door open when program started

F09
Unexpected heating

F10
Communication error

F11
Overheating

F12
Short circuit

F13
Mains voltage too high

F14
Mains voltage too low

F15
Faulty temperature sensor on motor PCB

F16
Faulty rinse sensor Displayed only in test

If your Bosch Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Bosch is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.

Leave a Reply

33 thoughts on “Bosch Washing Machine Error Fault Codes”

  1. “Error code F23 Aquastop activated” what is required to correct the error
    The response
    Please “I am a maintenance technician
    Thank you”

  2. I have a Bosch Washing Machine (Model No: WAQ28462GB) error code E57 flashes in the digital screen. What does this mean? Thanks.

  3. DIY Project Help Tips

    Lauren,
    Bosch Washer Error Code E23 = Aquastop activated
    The fault connected with “Error code E23 Aquastop activated” can’t be rectified by itself according to Bosch.
    You can research the “Aquastop activated” and see what is needed to clear the error.
    -RR

  4. I have a Bosch Series 6 Varioperfect washing machine (brand new a year ago) which flashes error code E:23 and beeps on every setting and has locked with my clothes inside and does not start. Any advice?

  5. Bosch Error E81 folowed by E00.
    My 2yo Bosch washing machine flashed this error and no one at the bosch helpline could tell me what it was. BOSCH tech called back after following up (he didnt know either), E81 error indicates I-Dose Sensor error.
    He is ordering sensors prior to coming out.
    Hope this helps anyone who is also searching this error (very frustrating)

  6. I have problem with my washing machine waw32640eu.
    When I start program I get 2 error codes E81 and E00.
    After that the machine works fine..
    What does it mean?

  7. DIY Project Help Tips

    Mike and Sara,
    If your Bosch washer has a front debris drain pump filter, clean it out. If not the pump may be clogged or jammed by a foreign object. Also check the drain hose to be sure it is not crimped or bent and therefore not letting the washer drain. What is the model number of your Bosch washer?
    -RR

  8. Mike and Sara

    I have a Bosch front loader that occasionally shows a error code F18. Yes it understand that this could be a pump problem, can you advise if this could be a filter that allows drainage that is slowing the draining and if i can find a filter and clean it prior to getting a service person out?

  9. DIY Project Help Tips

    Caz,
    E00 error code on Bosch washing machine usually indicates a bad control board in the washer. This page on RepairClinic will assist you if you need the control board. Bosch washer parts. Be sure you order the correct part for your Bosch Maxx 6.
    -RR

  10. Does anyone know what error code E:00 is on my Bosch maxx 6 washing machine? Can’t seem to find what this error relates to… Just switched it on and the error code on. It’s not mid cycle and the door is opening… I have cleaned out the drain. Any ideas?

  11. DIY Project Help Tips

    Kiavoush,
    Are you sure the error code is E33 on your Bosch washer? Is it possibly E3? What is the model number of your Bosch washer?
    -RR

  12. I have a Bosch washing machine. It show error E33 in digital screen. Does anybody what is it??? Thanks

  13. DIY Project Help Tips

    Kiavoush,
    The Bosch washing machine error code E3 means that the door is not seen as closed even if it is. This is due to a faulty door interlock switch. Replace the door interlock switch.
    -RR

  14. DIY Project Help Tips

    Gerti,
    Bosch washer F34 indicates a fault in the door lock circuit. The lock and/or main control board may have failed. Open the door and check that the door latch pin is ok. Is it being fully pushed to activate the lock? Let us know what you find.
    -RR

  15. Bosch WM10S420GR/1/ FD 8812 200560

    I changed two switch door to new and still gives me the same error (f34).
    how do I reset?
    what can I do?
    I checked and electronic package and is ok.
    Thanks!

  16. DIY Project Help Tips

    Joe M,
    If your washer was working properly before replacing the bearing, you may have inadvertently disconnected a wire harness on the motor or on the control board when you had the washer apart. Retrace all wire harnesses and find one that is most likely loose. If that is not the issue let us know and we can assist from there.
    -RR

  17. I have a Bosch nexxt 300 series washer. The bearing went out and the tub stopped. I had a repair friend help me replace the rear tub and bearing and it worked except it skips the spin cycle.
    I went through the error codes and found 1 for the door being open that was me.
    And P:03 d:08. Motor sensor fail.
    Does this mean that my motor is bad?
    Is there a way to reset the machine like most things?
    Is there a button or breaker that I can switch?

  18. DIY Project Help Tips

    Chris,
    The error code of F34 on your Bosch washing machine is a door lock fault. Remove and replace the door lock assembly.
    The Bosch washing machine manual says this…
    Door lock is broken SAFETY ERROR – switch ON/OFF for reset Normal mode
    Door hook is stuck – washing program is aborted – check door lock
    Door is stuck – door is unlocked, if possible – check mechanism
    Stiff gasket – operator control actions are blocked – check wire harness
    -RR

  19. I have a Bosch Axxis + Washer WAS24460 UC with error code F:34. The door mechanism is making noise and locking then unlocking constantly until the error message pops up. How can I reset?

  20. I have a similar problem & can’t reset my Logixx8 washing machine. Is there an easy way to reset or does it need to be looked at as E:23 error is not going away ? Cheers , Mark

  21. We have been getting an 01 error message indicating a water intake problem. We disconnected the hoses, checked/cleaned the screen caps and reconnected them. Looks like the error occurs during the rinse and spin cycles. Suggestions? Thanks.

  22. DIY Project Help Tips

    Greg,
    Bosch washer error code E13 indicates that your pump is taking too long to empty. The drain filter and pump needs cleaned out. Check, clean, and run a test cycle.
    -RR

  23. My Bosch washing machines has an error code E13 come up about half way through the cycle. What does the error code mean??

  24. DIY Project Help Tips

    Nikki,
    The E18 error code on a Bosch washing machine indicates a draining time out.
    This could happen for a couple of reasons:
    1) blockage inside the filter
    2) blockage inside the draining hose
    3) problem with the pump
    -RR

  25. I have an compact washing machine from Bosch, type SE5P1B with the error code E14, it even gave E18 as well once! Hope you can help me out with what this fault means!

  26. DIY Project Help Tips

    Parvin,
    Bosch washing machine error code E23 means there is a drain issue. Have you cleared the filter, made sure the drain hose is not clogged or blocked, made sure the drain pump itself is not clogged or jammed?
    -RR

  27. I have a Bosch washing machine. It show error E23 in digital screen. I don’t now what is it? Can you help me?

  28. DIY Project Help Tips

    Anne,
    Bosch washer error code F57 means there is a communication issue and or a logic problem with the control board. Turn the power off for a few hours and see if that resets the controls.
    -RR

  29. I have a Bosch Washing machine (Model No: WAS3289EU). I get a F57 fault error code that shows in the digital screen. What is this exactly and how to resolve this problem?

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.