Home » Home DIY Repair » Washing Machine Repair » Maytag Washing Machine Error Fault Codes

Maytag Washing Machine Error Fault Codes

Here is information that will assist you in identifying what may be making your MAYTAG washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The MAYTAG specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

Maytag Washing Machine Error Codes

MAYTAG Washing Machine Error/Fault Codes – Probable Fault Identifiers

Maytag Front load Washer Error Codes (Neptune)

DO
Door Open

FL
Failed to lock

F3 E2
Inlet water temperature fault

LO
Door failed to unlock

Lr
Locked Motor Rotor

ND
No Drain

NF
No Fill

OD
Opened Door

Sd
Suds lock, too many suds detected

PF
Power failure

If your MAYTAG Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Maytag is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.

Leave a Reply

2 thoughts on “Maytag Washing Machine Error Fault Codes”

  1. DIY Project Help Tips

    Ann,
    Is the spin cycle running as normal, meaning is it spinning long enough to get the water out of your clothing? You may have a drain pump or a drain hose issue. Inspect the hose at the back of the washer to make sure it is not kinked or crimped so the water is able to drain. If the drain hose is okay, then inspect the pump, there may be gunk jammed in it. Also, there should be a filter catch on the front of your washer, clean it out and run a normal wash load and see what happens.
    -RR

  2. We have a front load Maytag 2000 series washer. The washer will spin but the clothing is still dripping wet. What do you think the problem is. Washer is 4 yrs old.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.