Home » Home DIY Repair » Washing Machine Repair » Beko Washing Machine Error Codes

Beko Washing Machine Error Codes

Here is information that will assist you in identifying what may be making your Beko washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Beko specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

Beko washing machine error codesBeko washing machine error codes

H1
NTC Open or Short Circuit

H2
Heater Open Circuit

H3
Heater Always On

H4
Valve Triac Short Circuit

H5
Pump Open Circuit

H6
Motor Triac Short Circuit

H7
Pressure Sensor Failure

H11
Motor & or Tacho Open Circuit

If your Beko Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Beko is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.

Leave a Reply

5 thoughts on “Beko Washing Machine Error Codes”

  1. hi … i have a beko washing machine 7125….. after doing the diagnostic test its coming up as error code 8109 … and the drum didnt move… or spin … fills and empties fine… is it fixable?

  2. I have a Beko Washer.
    When i put it into test mode the 1602 error shows on the screen.
    Can u tell me what this means?

  3. DIY Project Help Tips

    Dave,
    If you replaced the filter catch, then the NOT DRAINING issue is most likely because of a crimped or kinked drain hose. Also check the drain pump as there may be foreign objects stuck inside it therefore causing the NO DRAIN issue.
    -RR

  4. Beko washing machine was working fine, then wouldn’t drain, now last time I cleaned filter which fixed it, so I cleaned filter replaced and still didn’t drain. I’ve looked at belt and seems ok can you give me any ideas please??

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.