Home » Home DIY Repair » Dishwasher Repair » Dishwasher Error Codes – Fault Codes For Dishwasher Repair

Dishwasher Error Codes – Fault Codes For Dishwasher Repair

Here is a list of Dishwasher error codes for Frigidaire, Fisher & PaykelGE, KitchenAid, Bosch, Kenmore, Hotpoint, Haier, Electrolux, LG, Maytag, Asko, Samsung, and Whirlpool Dishwashers. These fault codes are for the Dishwasher models listed. This list may not include your specific error code. If you cannot find your Dishwasher brand and or error code below, go to the bottom of the page and ask us. We will be happy to assist you with your Dishwasher error code and can help you to troubleshoot your specific Dishwasher issue. If your Dishwasher error code is found below, this error list will tell you what part is faulty or has failed. This list is based on the Dishwasher manufacturers list of error codes.

Dishwasher error codes - Fault identificationDishwasher error codes – Fault identification for repair

NOTE: For more Dishwasher error code details and information, click the DISHWASHER BRAND NAME link to go to the specific Dishwasher error code page.

ASKO DISHWASHER ERROR CODES

Asko Dishwasher Error Code F1
Water heating fault, selected temperature not reached within 60 minutes

Asko Dishwasher Error Code F2
High water level

Asko Dishwasher Error Code F3
Thermistor fault

Asko Dishwasher Error Code F4
Water fill error with dishwashers with level controlled fill

Asko Dishwasher Error Code F10
Overfilling

Asko Dishwasher Error Code F11
Drainage error

Asko Dishwasher Error Code F12
Water Inlet Fault

BOSCH DISHWASHER ERROR CODES

Bosch Dishwasher Error Code E0
This code is displayed when you enter diagnostic test mode and get saved fault codes from the control memory. The E0 code is displayed when no fault code is recorded.

Bosch Dishwasher Error Code E01 or E1
Heating issue

Bosch Dishwasher Error Code E15
No water in dishwasher or not sensing water.

Bosch Dishwasher Error Code E2
Temperature sensor bad

Bosch Dishwasher Error Code E22
Residual water in sump

Bosch Dishwasher Error Code E24
Drain error

Bosch Dishwasher Error Code E25
Drain issue – Filter clogged or pump impeller is jammed

Bosch Dishwasher Error Code E3
Not filling with water

Bosch Dishwasher Error Code E4
Water switch faulty

Bosch Dishwasher Error Code E5
Overfilled with water

Bosch Dishwasher Error Code E6
Aqua sensor faulty

Bosch Dishwasher Error Code E9
Flood protection activated

Bosch Dishwasher Error Code H24
24 hour delay

ELECTROLUX DISHWASHER ERROR CODES

Electrolux Dishwasher Error Code = Delay Lights Flashing
Heating Element Fail (The water did not get to the proper temp after a certain amount of time)

Electrolux Dishwasher Error Code loc or LOC
Door Is Locked

Electrolux Dishwasher Error Code 01
Water Leak Is Detected (Sensor under the dishwasher detected a leak)

Electrolux Dishwasher Error Code 02
Thermistor Sensor Fail

Electrolux Dishwasher Error Code 03
Wash Motor Fail

Electrolux Dishwasher Error Code 04
Upper Fan Fail

Electrolux Dishwasher Error Code 05
Upper Fan/Vent Fail

Electrolux Dishwasher Error Code 06
Lower Fan Fail

Electrolux Dishwasher Error Code 07
Drain Valve Fail

Electrolux Dishwasher Error Code 08
User Interface Control Fail

Electrolux Dishwasher Error Code 09
Communication Fail From User Interface Control TO Electronic Control Board

Electrolux Dishwasher Error Code 10
Electronic Control Board (Relay) Fail

Electrolux Dishwasher Error Code 11
Drain Valve Fail

Electrolux Dishwasher Error Code 12
Drain Valve Position (Drain valve has activated when it should be turned off)

Electrolux Dishwasher Error Code 13
Electronic Control Board Fail

Electrolux Dishwasher Error Code 30
Inconsistency between level on electronic pressure switch and level on anti boiling pressure switch.

Electrolux Dishwasher Error Code 50
Fault on the wash motor circuit. On some Electrolux dishwashers the motor has a control board located at the back at the bottom just behind the wash motor.

Fisher & Paykel DISHWASHER ERROR CODES

Fisher and Paykel Dishwasher Dishdrawer Error Code E1 = The first 2 program indicator lights are flashing.
The door is not completely closed.

Fisher and Paykel Dishwasher Dishdrawer Error Code E2 = 1 and 3 program indicator lights are flashing.
Temperature sensor is faulty.

Fisher and Paykel Dishwasher Dishdrawer Error Code E3 = 1 and 4 program indicator lights are flashing.
Drain hose is too low or the wash water level is too low.

Fisher and Paykel Dishwasher Dishdrawer Error Code E4 = Program indicator lights 1, 3, and 4 are flashing.
Drain hose is too high. Drain hose is kinked. The water is not draining out.

Fisher and Paykel Dishwasher Dishdrawer Error Code E5 = The first 3 program indicator lights are flashing.
Water supply hose is crimped or bent. Drain hose is too low. Water tap not turned on. Not enough water supply pressure.

Fisher and Paykel Dishwasher Dishdrawer Error Code E6 = The first 4 program indicator lights are flashing.
Flood switch activated.

Fisher and Paykel Dishwasher Dishdrawer Error Code F1
Flood switch is activated.

Fisher and Paykel Dishwasher Dishdrawer Error Code F2
Motor Issue.

Fisher and Paykel Dishwasher Dishdrawer Error Code F3
Temperature sensor has failed.

Fisher and Paykel Dishwasher Dishdrawer Error Code F4
Bad temperature sensor and or element.

Fisher and Paykel Dishwasher Dishdrawer Error Code F5
Lid Error.

Fisher and Paykel Dishwasher Dishdrawer Error Code F6
Lid Error.

Fisher and Paykel Dishwasher Dishdrawer Error Code F7
Lid Error.

Fisher and Paykel Dishwasher Dishdrawer Error Code F8
Electrical Issue.

Fisher and Paykel Dishwasher Dishdrawer Error Code F9
Electrical Malfunction.

FRIGIDAIRE DISHWASHER ERROR CODES

Frigidaire Dishwasher Error Code = i10
A low fill has been detected

Frigidaire Dishwasher Error Code = i20, i40, iF0
Clogged filters or a restricted drain line has been detected.

Frigidaire Dishwasher Error Code = i30
A leak or over flow of water has been detected in the bottom pan.

Frigidaire Dishwasher Error Code = i50
A problem has been detected with the drain or wash motor.

Frigidaire Dishwasher Error Code = i60
A problem has been detected with the water heating system.

Frigidaire Dishwasher Error Code = iC0
A problem has been detected with the electronic control system.

Frigidaire Dishwasher Error Code = UO
Vent open

Frigidaire Dishwasher Error Code = UF
Fan not running

Frigidaire Dishwasher Error Code = ER
Membrane Switch Failure

Frigidaire Dishwasher Error Code = CE
Configuration Error

Frigidaire Dishwasher Error Code = CL
Close Door – Door Switch Open

Frigidaire Dishwasher Error Code = dP
Drain Pump

Frigidaire Dishwasher Error Code = FL
Water Valve Is Open

Frigidaire Dishwasher Error Code = HO
Heat Delay

Frigidaire Dishwasher Error Code = hs
Hall Sensor

Frigidaire Dishwasher Error Code = LO
Low Rinse Aid

Frigidaire Dishwasher Error Code = PF
Power Failure

Frigidaire Dishwasher Error Code = rA
Rinse Aid

Frigidaire Dishwasher Error Code = RE
Rinse aid reed switch

Frigidaire Dishwasher Error Code = RF
Rinse aid

Frigidaire Dishwasher Error Code = rt
Relay / Triac Test

Frigidaire Dishwasher Error Code = Sd
Detergent Dispenser

Frigidaire Dishwasher Error Code = tu
Turbidity Sensor

GE DISHWASHER ERROR CODES

GE Dishwasher Error Code PF
Power Fail

GE Dishwasher Error Code C1
Draining Time Has Gone Past 2 Minutes

GE Dishwasher Error Code C2
Draining Time Has Gone Past 7 Minutes

GE Dishwasher Error Code C3
Dishwasher Will Not Drain

GE Dishwasher Error Code C4
Dishwasher Has Over Filled

GE Dishwasher Error Code C5
Dishwasher Is Not Filled With Enough Water (Drain Time Is Short)

GE Dishwasher Error Code C6
The Water Temperature Is Too Low (Water Not Hot Enough)

GE Dishwasher Error Code C7
Water Temp Sensor Faulty

GE Dishwasher Error Code C8
Detergent Dispenser Cover Blocked

CUP OPEN
The detergent cup has not been closed
Add detergent and latch the cup. When the problem occurs, the cycle will not start. You can override this by pressing the start pad again without opening the door.

LEAK DETECTED
Possible leak is detected
The cycle will be cancelled on models with leak detection.

HAIER DISHWASHER ERROR CODES

Haier Dishwasher Error Code E1
The door is NOT closed properly.

Haier Dishwasher Error Code E2
The temperature of inlet water is out of range.

Haier Dishwasher Error Code E3
The water in the dishwasher is not to the correct level.

Haier Dishwasher Error Code E4
Open the dishwasher door and remove the filters and check the filters in the bottom of the dishwasher are clear of debris.

Haier Dishwasher Error Code E5
Low or no water pressure. Check the water supply is turned on and has sufficient pressure.

Haier Dishwasher Error Code E6
Locate the water supply valve, and shut off the supply, which will prevent any more water from flowing to the dishwasher.

HOTPOINT DISHWASHER ERROR CODES

Hotpoint Dishwasher Error F01 = Anti flood overflow

Hotpoint Dishwasher Error F02 = Water fill solenoid valve failure

Hotpoint Dishwasher Error F03 = Water drain failure timeout

Hotpoint Dishwasher Error F04 = Thermostat fault

Hotpoint Dishwasher Error F06 = Water fill timeout

Hotpoint Dishwasher Error F07 = Water turbine damaged

Hotpoint Dishwasher Error F08 = Temperature timeout fault

Hotpoint Dishwasher Error F09 = Software error

Hotpoint Dishwasher Error F10 = Heating element fault

Hotpoint Dishwasher Error F11 = Wash pump failure

Hotpoint Dishwasher Error F12 = Main board & Display communication error

Hotpoint Dishwasher Error F13 = Main board fault

Hotpoint Dishwasher Error F15 = Virtual sensor error

KENMORE DISHWASHER ERROR CODES

Kenmore Dishwasher Error Code = Start Resume light blinking slow
When the dishwasher door opens or electrical power is removed during the cycle then the dishwasher will not start again. The door is detected as being closed and the Start Resume button is being pressed

Kenmore Dishwasher Error Code = Clean light is blinking 7 times
Heater circuit fail. Control panel did not detect the water getting hot. Did not detect heating element was energized to heat the water during the wash cycle

Kenmore Dishwasher Error Code = Sanitize LED blinking at end of cycle
Control panel could not detect if sanitation has been achieved

Kenmore Dishwasher Error Code = Console light blinking rapidly
There is a stuck button on the control panel

Kenmore Dishwasher Error Code = Clean light is constantly illuminated
Dishwasher cannot start a wash cycle until it sees that the door has been opened after the previous washing cycle

Kenmore Dishwasher Error Code = Control lock LED is ON but not responding to pressing of the keys
Turned on by accident or there is a control detected key pad problem

KITCHENAID DISHWASHER ERROR CODES

KitchenAid HE Dishwasher Error Code: 1-1
Electronic control board detects stuck relay on the circuit board.

KitchenAid HE Dishwasher Error Code: 1-2
Damaged or bad memory on the control board.

KitchenAid HE Dishwasher Error Code: 2-1
The electronic control board has detected stuck key on the control panel.

KitchenAid HE Dishwasher Error Code: 2-2
The electronic control board detected no communication from the control panel.

KitchenAid HE Dishwasher Error Code: 3-1
There may be a break in the wiring or the thermistor/OWI failed.

KitchenAid HE Dishwasher Error Code: 3-2
The thermistor/OWI circuit has shorted out electrically.

KitchenAid HE Dishwasher Error Code: 3-3
OWI (Optical Water Indicator) failure.

KitchenAid HE Dishwasher Error Code: 4-4
The electronic control board detects no circulation in the pump motor operation.

KitchenAid HE Dishwasher Error Code: 5-1
Door won’t shut or latch.

KitchenAid HE Dishwasher Error Code: 5-2
Dishwasher door will not open.

KitchenAid HE Dishwasher Error Code: 6-1
The electronic control board does not detect water coming into the dishwasher tub.

KitchenAid HE Dishwasher Error Code: 6-2
Water inlet valve has electrical issue.

KitchenAid HE Dishwasher Error Code: 6-3
Soap suds or air is in the water pump.

KitchenAid HE Dishwasher Error Code: 6-4
The float switch is open position.

KitchenAid HE Dishwasher Error Code: 6-6
Incoming water is not hot.

KitchenAid HE Dishwasher Error Code: 7-1
Heating element does not heat.

KitchenAid HE Dishwasher Error Code: 7-2
Heating element will not turn off – Constant heating.

KitchenAid HE Dishwasher Error Code: 8-1
Slow water drain from dishwasher tub.

KitchenAid HE Dishwasher Error Code: 8-2
Drain pump has an electrical problem.

KitchenAid HE Dishwasher Error Code: 9-1
Electronic control board is not able to detect the position of the diverter.

KitchenAid HE Dishwasher Error Code: 9-2
Diverter is stuck in on position.

KitchenAid HE Dishwasher Error Code: 9-3
The diverter disk is missing or has come loose.

KitchenAid HE Dishwasher Error Code: 9-4
Lower spray arm error – Not moving.

KitchenAid HE Dishwasher Error Code: 10-1
Electrical dispenser problem.

KitchenAid HE Dishwasher Error Code: 10-2
Vent wax motor electrical problem.

KitchenAid HE Dishwasher Error Code: 10-3
Drying fan issue.

LG DISHWASHER ERROR CODES

LG Dishwasher OE Error Code
OE error code on the dishwasher display is telling you that the unit is detecting a drain issue.

LG Dishwasher LE Error Code
LE error code on the dishwasher display is telling you there is an issue with the motor’s proper operation.

LG Dishwasher HE Error Code
HE error code on your LG dishwasher means it has sensed a heating or heater issue.

LG Dishwasher FE Error
FE error on your dishwasher means that your unit has a filling error.

LG Dishwasher CE Error
CE error code on the display of your dishwasher means an error with the motor’s operation.

LG Dishwasher PF Error
PF error code on your LG dishwasher tells you a power failure has occurred. This feature is to protect your dishwasher in case of a power interruption.

LG Dishwasher tE Error
tE error code on the display of your dishwasher means a thermal error.

LG Dishwasher iE – IE – 1E – 1e – e1 Error
iE or 1e error code on the display means water inlet error.

MAYTAG DISHWASHER ERROR CODES

Maytag Dishwasher Error Code (Clean Light Flashing) 1-1
Electronic control board is detecting a stuck electrical relay on the circuit board

Maytag Dishwasher Error Code (Clean Light Flashing) 1-2
All the lights are on as the user interface control is not compatible with the electronic control board

Maytag Dishwasher Error Code (Clean Light Flashing) 2-1
Electronic control board detects a stuck key button on the control panel

Maytag Dishwasher Error Code (Clean Light Flashing) 2-2
User interface control unable to communicate with the electronic control board

Maytag Dishwasher Error Code (Clean Light Flashing) 3-1
There may be a break in the electrical wiring OR the thermistor (water temp sensor) component failed. The optical water indicator that detects the amount of debris in the water may have also failed.

Maytag Dishwasher Error Code (Clean Light Flashing) 3-2
The Thermistor / Optical Water Indicator circuit is electrically shorted

Maytag Dishwasher Error Code (Clean Light Flashing) 3-3
Optical Water Indicator (OWI) has failed

Maytag Dishwasher Error Code (Clean Light Flashing) 4-3
Communication stopped from the wash pump motor and the electronic control board

Maytag Dishwasher Error Code (Clean Light Flashing) 5-1
Dishwasher door will not shut (Door Latch Issue)

Maytag Dishwasher Error Code (Clean Light Flashing) 5-2
Dishwasher door will not open

Maytag Dishwasher Error Code (Clean Light Flashing) 6-1
Electronic control board does not detect water coming into the tub

Maytag Dishwasher Error Code (Clean Light Flashing) 6-2
The water inlet valve is having an electrical issue

Maytag Dishwasher Error Code (Clean Light Flashing) 6-3
Air or SUDS are in the water pump

Maytag Dishwasher Error Code (Clean Light Flashing) 6-4
The float switch is electrically open or stuck

Maytag Dishwasher Error Code (Clean Light Flashing) 6-6
Water coming into dishwasher is too cold

Maytag Dishwasher Error Code (Clean Light Flashing) 6-7
Flow meter is not connected or faulty

Maytag Dishwasher Error Code (Clean Light Flashing) 7-1
Heating element not heating

Maytag Dishwasher Error Code (Clean Light Flashing) 7-2
Heating element will not turn off – constant heat

Maytag Dishwasher Error Code (Clean Light Flashing) 8-1
Water is draining too slow

Maytag Dishwasher Error Code (Clean Light Flashing) 8-2
Electrical problem with drain pump

Maytag Dishwasher Error Code (Clean Light Flashing) 8-3
Drain pump is stuck ON constantly

Maytag Dishwasher Error Code (Clean Light Flashing) 10-1
Electrical problem with dispenser

Maytag Dishwasher Error Code (Clean Light Flashing) 10-3
Drying fan issue

SAMSUNG DISHWASHER ERROR CODES

Samsung Dishwasher Error Code: 0E
OVER-FLOW ERROR Overflow error

Samsung Dishwasher Error Code: 4E
WATER SUPPLY ERROR No water detected in the tub for 5 minutes after start of dishwasher

Samsung Dishwasher Error Code: 4E1
Water entering the dishwasher is more than 175 degrees

Samsung Dishwasher Error Code: 5E
WATER DRAIN ERROR Not draining or not draining fast enough

Samsung Dishwasher Error Code: 6E
WATER DRAIN ERROR Not draining or not draining fast enough

Samsung Dishwasher Error Code: 9E
Low water level error

Samsung Dishwasher Error Code: bE2
Stuck button on the control panel

Samsung Dishwasher Error Code: HE
WATER HEATER ERROR Heater failure

Samsung Dishwasher Error Code: HE1
The thermistor (temperature sensor) detects 176 degree water or above in the tub

Samsung Dishwasher Error Code: Flashing “Heavy”
Water leak

Samsung Dishwasher Error Code: Lights Highlighted – Heavy, Delicate and Quick
Temperature Sensor error

Samsung Dishwasher Error Code: Lights Highlighted above Delicate and Quick
Dishwasher thinks that the door is open.

Samsung Dishwasher Error Code: LE
Water leak detected

Samsung Dishwasher Error Code: oE
Overflow error

Samsung Dishwasher Error Code: PE
Half-load error

Samsung Dishwasher Error Code: SE
WATER DRAIN ERROR Not draining or not draining fast enough

Samsung Dishwasher Error Code: tE1
Thermistor (temperature sensor) error

WHIRLPOOL DISHWASHER ERROR CODES

Whirlpool Dishwasher Fault Code F1
Problem with the NTC (temperature sensor) or thermistor

Whirlpool Dishwasher Fault Code F2
A water leak has been detected

Whirlpool Dishwasher Fault Code F3
Issue with water heating system

Whirlpool Dishwasher Fault Code F4
The dishwasher isn’t draining

Whirlpool Dishwasher Fault Code F5
Spray arms are clogged or otherwise malfunctioning

Whirlpool Dishwasher Fault Code F6
The fault occurs when the dishwasher does not detect any incoming water despite the water inlet valve being open

Whirlpool Dishwasher Fault Code F7
Fault with flow meter detected

Whirlpool Dishwasher Fault Code F8
Water Turbidity Fault

Whirlpool Dishwasher Fault Code F9
Water inlet is staying open

Whirlpool Dishwasher Fault Code F0
Sensor fault or failure

Whirlpool Dishwasher Fault Code FA
The optical water indicator is detecting high levels of water turbidity

Whirlpool Dishwasher Fault Code FB
Motorized diverter valve fault detected

Whirlpool Dishwasher Fault Code FC
Water hardness sensor failure

Dishwasher replacement parts for repairsNEED DISHWASHER PARTS? Over 6,000 New and Discounted Dishwasher Replacement Parts For ALL Models

More Dishwasher troubleshooting for Fisher & Paykel Dishwasher Error CodesFrigidaire Dishwasher Error Codes, GE Dishwasher Error Codes, ASKO Dishwasher Error Codes, Hotpoint Dishwasher Error Codes, HAIER Dishwasher Error Codes, KitchenAid Dishwasher Error Codes, Kenmore Dishwasher Error Codes, Electrolux Dishwasher Error Codes, LG Dishwasher Error Codes, Maytag Dishwasher Error Codes, Bosch Dishwasher Error Codes, Samsung Dishwasher Error Codes, and Whirlpool Dishwasher Error Codes.

Need assistance? Please leave what type of dishwasher you have and what error code you are getting and we will be happy to assist.

Leave a Reply

36 thoughts on “Dishwasher Error Codes – Fault Codes For Dishwasher Repair”

  1. Hi there.
    We have Krupps K1100E-A the machines showing Error 10 . What is this error and how do we fix it ?
    Thank you

  2. Hello, I have a hOmelabs countertop dishwasher and the glasses light is blinking and it’s beeping. I have tried to unplug it and plug it back in but it still does it. I have checked all the lines and everything is good there so I need some help. Thanks

  3. Hi I have a SVAN SVJ310XD dishwasher and I just get 2h on the display and won’t start, any help would be great full.

    Regards Alan

  4. I have the same issue. Did you figure it out? If not I noticed by taking off the drain filter on the bottom of the tub there is water inside and it might not be draining properly maybe the pump, solenoid, or something else?

  5. Hi. I have a Westinghouse WSF6608 that has stopped working. It is showing an error code “F9” which the Uers Manual shows “Flow Control Valve position error”. Not sure what the Flow Control Valve refers to.

  6. I have a pdt660ssf2ss GE dishwasher that has just showed an E8 code on the options window. I can not find any information online as to what this means. This dishwasher is only a couple months old, but has been emitting a very rank smell between cycles.

    Please help

  7. Dawn Wright-Lewis

    I have a Bush dishwasher dwfs 146w it has a flashing code of e5 and also e2.
    What does this mean?

  8. Hi there. We have an EISNO and it’s showing an E9 . What is this error and how do we fix it ?

  9. My Bauknegt dishwasher stops halfway indicating errorcode F8 E3. Filters clean, cables/tubes all fine.
    Can it be a software/printboard problem? Bijnkers.

  10. I have a new GE Profile, Model #: PDT660SGFWW, which shows an Error code E1. There is some water at the base of the dishwasher.

  11. DIY Project Help Tips

    Kathy,
    GE Dishwasher Error Code F50 or 50 is a Temperature sensor failure.

    -Shut off power to the dishwasher and check the wiring connections on the temperature sensor – located on the flood switch.
    -Check the resistance of the temperature sensor.
    -It should measure about 11,000 ohms at room temperature.
    -Replace the flood switch if the temperature sensor is bad.

    -RR

  12. I have a brand new Stainless Steel Profile GE dishwasher model and it I cannot seem to get it to start.
    The code reflected is the number 50.
    The manual does not explain what that mean.
    When I hit the start button, nothing happens.
    Can you advise what needs to be done?

  13. I have a White-westinghouse dishwasher and it shows error code (F9 = Not even).
    What is the part generates this error?

  14. DIY Project Help Tips

    Sophie,
    IKEA aka Electrolux Dishwasher Error Code 50
    Fault on the wash motor circuit.
    On some Electrolux dishwashers the motor has a control board located at the back at the bottom just behind the wash motor.
    Check the motor to be sure all wire harnesses are connected securely.
    -RR

  15. I have an Ikea dishwasher (apparently made by Electrolux).
    Model name is VÄLGJORD.
    Error code 50 is flashing and the dishwasher won’t start.
    I can’t find the manual so have no idea what the problem is.
    The dishwasher has been plumbed in and used for no more than 6 weeks.

  16. DIY Project Help Tips

    Donna,
    The Maytag Dishwasher tech sheet shows FLASHING NUMBER 9 may be an issue with the keypad in the touchpanel has shorted.
    -RR

  17. I have a maytag dishwasher model number mdbh965aww. It’s a legacy series quiet series 300. I have a flashing number 9 and a rinse only green light showing. Please help!

  18. As I said, the circulation pump motor is connected with two plugs, each with two wires, so not just a case of connecting 240v to it to see if it works. Does anyone know how to test this?
    Is my thermistor OK at 57k?

  19. DIY Project Help Tips

    Phil Thompson,
    Most likely you have a bad circulation pump on your Beko DW686 dishwasher.
    Take it out and test.
    If faulty, repair or replace.
    -RR

  20. I have a Beko DW686 dishwasher displaying code Er3. When set away it fills with water and starts heating the water. The water does not circulate so the heater cycles on its overheat stats. I have checked that the circulation pump is not blocked or stuck but am unable to test the pump motor without further information as to its wiring (it has two plugs with two wires each). I have checked the thermistor which reads 57k at room temperature.

  21. I have a Bellini dishwasher model bdw127 w f and is 3 years old. It starts and maybe halfway through starts alarming and flashing the padlock key symbol and 6h symbol. I have reset it by turning all power off for days and still it does the same. Any ideas what this means as its been discontinued and no manuals available.

  22. It is very difficult to see the model number of the dishwasher as it is up against a bench but I think it reads W60A1A4018. Unsure if it ends 8 or B. It wouldn’t be 2 years old.

  23. DIY Project Help Tips

    Ian Grant,
    Usually on the inside door of the dishwasher on the side.
    -RR

  24. DIY Project Help Tips

    Ian Grant,
    Please supply us with the model number of the dishwasher and we can assist further.
    -RR

  25. My Rank Arena dishwasher is showing error E3 I don’t know what that is as I haven’t got the manual.

  26. DIY Project Help Tips

    Alan,
    Yes the temp sensor is the same as the thermistor. You replaced the heating element plus the temp sensor and you still get Error code 3 on your Whirlpool dishwasher? Have you made sure you checked everything with a multimeter to see if there is a bad wiring harness or similar?
    -RR

  27. My whirlpool adp6000ix has error code 3 , according to the manual either the heater element or temp sensor is at fault. I have replaced both and the problem still there. Is the temp sensor the same thing as the thermostat or thermistor. I have rechecked the plugs and connections, test resistance in each unit even the old units test the same as the new?

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.