Home » Gardening » How To Make A Vertical 6 Tray Garden Herb Tower With Cedar Wood

How To Make A Vertical 6 Tray Garden Herb Tower With Cedar Wood

Have you ever seen an Herb Garden Tower made with Cedar Wood? Neither have we so we made our own. This step by step picture diy will show some of the process for building our Vertical Garden Herb Tower.

Herb Garden Tower Project Details and Dimensions:
– 6″ Tall Cedar Wood Herb Tower
– Canted back 15 degrees
– Each trough is 26″ long – 3.5″ wide – 4.5″ deep (with drain holes along the back bottom)
– Tray bottoms have tenons which go through the uprights and are secured in place with wooden dowels
– Fronts and backs are screwed in place with outdoor wood screws
– Bottom of the uprights are connected to the base with a pinned mortise and tenon joints
– Brace leading backwards is only butted and screwed in place
– Upright “Leg” boards are 2 x 4’s and the trough bottoms are 1″ x 3.5″ cedar board

diy garden herb tower

diy Garden Herb Tower

custom herb garden tower diy_05

Here is our wood ready to be cut to make our Herb Tower.
The wood cost us around $30 at the local home improvement store.

custom herb garden tower diy_07

All of our cedar wood is cut and ready to be assembled.

custom herb garden tower diy_04

We notched out the wood to be able to connect and fasten all of our cedar boards together.
We made the notches using a wood drill bit by making multiple holes
.
The above cedar board is 1 of 2 of the vertical boards that will make our herb tray legs.

custom herb garden tower diy_06

If you are going to be making this yourself, then here is a nice closeup of the hole we drilled.
(Once drilled out we used a wood chisel to make the hole square)

custom herb garden tower diy_08

Here is one of the long vertical legs being assembled to form the bottom base of our herb tower.

custom herb garden tower diy_09

Here is a closeup of how we made the sides of the herb tower.
Each bottom portion of the herb trays has a 1 inch portion of wood sticking out with a wood dowel through it.
This is to keep it secure but also to make it easy to slide out the bottom of each herb tray.

custom herb garden tower diy_01

Here is our 6 Tray Vertical Herb Garden completely assembled and ready to plant the Herbs!

custom herb garden tower diy_03

Here is another angle of the herb garden.
(Built with saving space in mind and takes up hardly any room at all making it ideal anywhere)

custom herb garden tower diy_02

Here is the rough drawing of our tower sides where the dowel attaches.

custom herb garden tower diy_10

Another drawing of the tower connection point before we began building it.

custom herb garden tower diy_11

Here is a drawing of the front and side views of the herb garden tower.

Leave a Reply

1 thought on “How To Make A Vertical 6 Tray Garden Herb Tower With Cedar Wood”

  1. I was wondering about the bottoms of the trays. If the wood extends past the sides on both sides, how does it make it easier to get the bottoms out? It appears that you’d have to take the screws out of the trays on one side to get the pieces out. Wouldn’t it be easier to simply screw the bottoms to the side? Perhaps put a hinge on one side and a couple of dowels through the other side… pull out the dowels and the bottoms hinges down… Just an idea.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.