Home » Woodworking » How To Build A Vintage Style Dining Room Table Yourself

How To Build A Vintage Style Dining Room Table Yourself

Building a Vintage Dining Room Table yourself is not as hard as you may think. This was a relatively cheap and easy diy woodworking project. It cost us about $200 dollars to build with everything included. See the pictures below for our step by step building process.

Equipment Needed: Miter Saw – Drill – Pocket Hole Jig – Sander – Wood Clamp – Hammer – Paint Brush

The Wood Used: The table top is premium douglas fir 2x8s. – The frame is made from pine 2x4s. – The legs are 4 pre-made deck awning posts that were cut to size.

how to build a vintage dining room table_10

Here is the wood we purchased for our table at Home Depot.
WOOD – Douglas fir 2x8s – Pine 2x4s – 4 Pre-made deck awning posts

how to build a vintage dining room table_09

Here we are cutting the 2x8s to the correct size for the top of our table.

how to build a vintage dining room table_01

The deck awning posts had to be cut so our table was not to high.

how to build a vintage dining room table_06

Here we are drilling the holes in the table frame so we can easily screw the table together.

how to build a vintage dining room table_12

We drilled at an angle so the screws would be sunk into the wood for a better appearance.

how to build a vintage dining room table_13

Here is the bare table frame and legs put together and awaiting the top to be securely installed.

how to build a vintage dining room table_08

Here we are rounding off the sides of our table top to give it a nice vintage style look.

how to build a vintage dining room table_03

Here is our table fully put together and stained using a nice deep rich wood stain.

how to build a vintage dining room table_04

After staining we sanded some more to give it an extra worn out vintage look.

how to build a vintage dining room table_05

After sanding the edges for the second time we then put on a nice coat of finishing wax.

how to build a vintage dining room table_07

We then painted the legs a nice bright “country” white to give it a different kind of style.

how to build a vintage dining room table_11

Here is our Vintage Style Dining Room Table painted and stained and ready to eat on.

how to build a vintage dining room table_02

Here is a nice view of the side of the table showing the rounded out corners for the vintage look.

how to build a vintage dining room table_14

Another angle of our diy Vintage Table.

Leave a Reply

6 thoughts on “How To Build A Vintage Style Dining Room Table Yourself”

  1. Can you provide a little more step by step on how to out the frame together? Also what size screws you used in each part of the frame?

  2. DIY Project Help Tips

    Hi Matt,
    We used just good old regular wood screws. We used a drill and drilled the holes for the wood screws first. We then screwed the wood screws down about 1/8″ below the surface of the table. Once all the screws were down we used a wood filler to fill in the holes so the screw heads were not visible. When doing this use a wood filler that is the same color as your table to help blend in the colors.
    -RR

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.