RemoveandReplace.com - Tips, Tricks, Ideas, Repair

Kenmore Washing Machine Error Fault Codes

Here is information that will assist you in identifying what may be making your Kenmore washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Kenmore specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

Kenmore Washing Machine Error Codes



KENMORE Washing Machine Error/Fault Codes – Probable Fault Identifiers

Kenmore Washer Front Load Error Codes

F/H
Not filling

F/02
Takes a long time to drain

F/05
Water temperature sensor



F/06
Motor tachometer

F/09
Overflow

F/10
Motor control board overheated

F/11
Serial communication error between main electronic control board and motor control board

F/13
Dispenser circuit error

F/14
Main control board EEPROM error

F/15
Motor control board error



Sud
Excessive suds

F/dL
Door lock error

F/dU
Door unlock error

If your Kenmore Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Kenmore is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.



ALLEN VETTER - DIY Repair Assistant
Allen is a Home Maintenance/Appliance Tech and the author/creator of this website. He has 33 years of experience troubleshooting and repairing all types of appliances. Contact here

14 thoughts on “Kenmore Washing Machine Error Fault Codes”

  1. I have a Kenmore Elite HE3, it is displaying an F13 error code, what if anything can I do to fix this? I find nothing that explains it ? Can anyone help. I am out of the USA?

    1. ALLEN VETTER - DIY Repair Assistant

      Karen,
      Kenmore Elite HE3 displaying F13 error code…
      F13 indicates a problem with the dispenser motor.
      Try and press the release tab at the back of the dispenser drawer.
      Pull it out and then slide it back in.
      This may work if the linkage between the motor and the drawer is twisted.
      -RR

  2. Wayne Skinner

    Codes found on my Kenmore High Efficiency Series500 top load washer.
    F-1,E-0
    F-2,E-0
    F-3,E-0
    F-4,E-0
    F-5,E-0
    F-6,E-0
    F-8,E-0
    F-9,E-0
    F-10,E-0
    F-11,E-0
    F-12,E-0
    F-14,E-0
    F-15,E-0
    I replaced the Actuator
    This came up in error code earlier

  3. My top load Kenmore Elite Washing machine will turn on for about one second and then turns itself off. Why?

    1. DIY Project Help Tips

      Patricia,
      The Kenmore E6 error code that shows on the washer indicates an issue with the clutch or the main control unit.
      It can be the wire harness is not connected correctly to the clutch motor as well.
      Check all connectors make sure everything is connected properly.
      -RR

  4. I have a kenmore elite top load washer with an error code of Cl blinking
    can you please tell me what this code means

    1. DIY Project Help Tips

      Roger Hinshaw,
      The error code “OE” on your Kenmore washer means a drain error. This error displays if the washer is draining too slow or if not fully draining within 10 minutes. The drain pump and filter will need to checked and cleaned.
      -RR

    1. DIY Project Help Tips

      Marina,
      Can you explain further? When you say the washer does not turn off automatically, please describe in detail. Does the panel stay on or does the washer actually keep washing? Filling? Buzzing? Draining?
      -RR

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.