RemoveandReplace.com - Tips, Tricks, Ideas, Repair

Whirlpool Washing Machine Error Fault Codes




Here is information that will assist you in identifying what may be making your Whirlpool washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Whirlpool specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

Whirlpool Washing Machine Error Codes



Whirlpool Washing Machine Error/Fault Codes – Probable Fault Identifiers

Whirlpool Duet Front Loading Automatic Washer Fault Codes

FH
No water detected entering machine

F02
Long Drain

F05
Water temperature sensor error



F06
Drive motor tachometer error

F07
Motor control unit error

F09
Overflow condition

F10
Motor Control Unit (MCU) heat sink thermal trip

F11
Serial communication error

F13
Dispenser circuit error

F14
EEPROM error



F15
Motor Control Unit (MCU) error

F20
Water Supply Issue

F21
DRAINING PROBLEM – Drain Pump and Filter

Sud
SUDS LOCK

FdL
Door lock error

FdU
Door unlock error

Whirlpool Calypso Automatic Washer Fault Codes



PF
Power failure

FL
Flood condition

Er
Processor reset error

LF
Long fill

CE
Communications error

Ld
Long drain

CI
Average current limit



ob
Off balance

Sr
Stuck relay

LS
Lid switch error

SL
Suds lock

Whirlpool Cabrio Error Fault Codes

dL (F80, 82, 84, 85) = Door Lock Fail
DU (F83) = Door Unlock Fail
F1 (F60-68) = Primary Control Fail
F2 = Keypad User Interface Fail
F40 = ATC Thermistor Open Short
F41 = Motor RPS Thermistor Open Short
F42 = Heater Thermistor Open Short
F50 = Motor Stalled
F51 = Motor RPS Fail
F52 = Motor Stop Fail
F53 = Motor Control Over Temperature
F54 = Motor Control Over Current
F72 = Basket Re-engage Fail
HC = Hot and Cold Reversed
Ld (F32) = Long Drain Time
LF (F30) = Long Fill Time
Lid (F81) = Open or Close Door Lid
oL (F70) = Overloaded Tub
Po = Pump Out Lid Open
Sd (F71) = Excessive Suds Detect
uL = Unbalanced Wash Load

If your Whirlpool Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Whirlpool is displaying.



NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.

ALLEN VETTER - DIY Repair Assistant
Allen is a Home Maintenance/Appliance tech and the author/creator of this website. He has 33 years of experience troubleshooting and repairing all types of machinery. Contact here



"Do It Yourself" DIY Tips, Tricks, Ideas, Repair:



12 thoughts on “Whirlpool Washing Machine Error Fault Codes”

  1. I have a whirlpool front load washer model number wfw9050xw03.
    I replaced the pump, but when it goes to drain cycle, it stops and just starts beeping.

  2. I have a Whirlpool washer.
    It comes on then when it is time to wash clothes, it won’t want to wash them as it is filled up with water.

  3. I have a 5 yr old Whirlpool front loader model #wfw9050xwoo and it fills up, then on the wash cycle it starts beeping and says add garment. I called whirlpool and I can’t afford to have a technician to come and I hope its fixable at a low cost.

  4. I don’t know what my error code is but the washer model is wfw905oxwoo and once it fills and starts to wash it starts beeping and tells me to add garment. I unplugged it for 3 minutes and it still does it. It is a Whirlpool.

  5. Whirlpool wfw9050xw03 door lock and as soon as you press start it hums but nothing else happens. It stopped working half way on a big load? What can I do?

    1. DIY Project Help Tips

      Crystal,
      The E1 F9 or F9E1 error code on a Whirlpool Washer is indicating: Drain Pump Error or Long Drain
      Check to be sure that the drain hose is not bent or crimped.
      Check to be sure nothing is clogging the pump or filter.
      Here is a video that may assist you… Whirlpool Duet F9E1 Error Code Fix
      -RR

  6. In diagnostic mode my Whirlpool H2, the sensing wash rinse spin lid lock blinks twice. It hesitates blinks twice hesitates, etc…what code is this?????

    1. DIY Project Help Tips

      Tom,
      Can you give us the model number of your Whirlpool washer? At what point does the lid lock start blinking?
      -RR

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.