Home » Home DIY Repair » Dishwasher Repair » EdgeStar Countertop Dishwasher Error Codes – Owners Manual – Parts

EdgeStar Countertop Dishwasher Error Codes – Owners Manual – Parts

If your EdgeStar dishwasher is displaying an error code, below we have the solutions for what part needs to be checked. The EdgeStar dishwasher error codes also tell you what parts need to be replaced or have become faulty. Use the error code list below to help you to identify your EdgeStar dishwasher error and fix it yourself. There are also troubleshooting methods to help you find out what is wrong with your EdgeStar dishwasher. These troubleshooting methods cover the EdgeStar countertop dishwashers model numbers DWP45E, DWP40BL, DWP40S, DWP40W, DWP60ES, and DWP61ES. You will also find the EdgeStar Dishwasher Owner’s Manual below.

EdgeStar Countertop Portable Dishwasher - Error Codes - TroubleshootingEdgeStar Countertop Portable Dishwasher – Error Codes – Troubleshooting

EdgeStar Countertop Dishwasher Error Codes

EdgeStar Countertop Dishwasher Error Code E1 = Long WATER FILL Time
(2 Possible Reasons For Error Code E1)
Probable Cause Of E1 Error = LOW WATER PRESSURE
Check and Repair Solution = Increase the water pressure going into the dishwasher
Probable Cause Of E1 Error = WATER INLET HOSE IS BENT OR KINKED
Check and Repair Solution = Check the inlet hose and remove any kinks or bends

EdgeStar Countertop Dishwasher Error Code E2 = Long WATER DRAIN Time
(3 Possible Reasons For Error Code E2)
Probable Cause Of E2 Error = DRAIN LINE IS TOO LONG
Check and Repair Solution = Do not extend the drain hose
Probable Cause Of E2 Error = DRAIN LINE IS TOO HIGH UP
Check and Repair Solution = Make sure the unit is on the countertop and not below
Probable Cause Of E2 Error = THE DRAIN HOSE IS BENT OR KINKED
Check and Repair Solution = Check that the drain hose has no kinks or bends in it

EdgeStar Countertop Dishwasher Error Code E3 = Long WATER HEAT Time
(3 Possible Reasons For Error Code E3)
Probable Cause Of E3 Error = WATER TEMPERATURE COMING INTO DISHWASHER TOO COLD
Check and Repair Solution = Increase the water temperature going to the dishwasher
Probable Cause Of E3 Error = WATER HEATER HAS MALFUNCTIONED
Check and Repair Solution = Remove and check or replace dishwasher water heater and or wiring
Probable Cause Of E3 Error = WATER HEATER SENSOR HAS MALFUNCTIONED
Check and Repair Solution = Remove and check or replace dishwasher water sensor and or wiring

EdgeStar Countertop Dishwasher Error Code E4 = Internal WATER LEVEL IS TOO HIGH
(3 Possible Reasons For Error Code E4)
Probable Cause Of E4 Error = THE WATER PRESSURE IS TOO HIGH
Check and Repair Solution = Decrease the water pressure going to the dishwasher
Probable Cause Of E4 Error = INLET HOSE IS NOT CONNECTED CORRECTLY
Check and Repair Solution = Be sure the inlet hose is not inadvertently connected to the drain valve
Probable Cause Of E4 Error = THE DRAIN HAS MALFUNCTIONED
Check and Repair Solution = Remove and check or replace drain pump and or wiring


HOW TO: Setup Install Connect The EdgeStar Countertop Dishwasher

EdgeStar Dishwasher - How To Setup - PDF MANUALHOW TO CONNECT EDGESTAR DISHWASHER – PDF FILE

Troubleshooting your EdgeStar Dishwasher:

EDGESTAR DISHWASHER WILL NOT TURN ON:
1 – Home power failure = Restore the power supply
2 – Insufficient amps = Move unit to outlet with sufficient amps
3 – No power at the outlet = Check the circuit breaker
4 – Door is not latched = Close and latch the dishwasher door
5 – Unit is not leveled = Level the dishwasher
6 – The plug is not correctly in the socket = Insert the plug correctly into the socket
7 – The power cord is damaged = Remove and replace the power cord
8 – The power voltage is too low = Move unit to another outlet with proper voltage

DISHES IN EDGESTAR DISHWASHER ARE NOT CLEAN:
1 – Improper loading of dishwasher = Arrange dishes so spray reaches all surfaces
2 – Spray arm not freely rotating = Check that no items are stopping the rotation
3 – Not enough dish detergent = Add more dish washing detergent
4 – Water inlet hose is bent = Check inlet hose and remove any bends
5 – Food left on dishes = Rinse off excess food from cups or dishes

EdgeStar Dishwasher - DWP61ES - PDF OWNERS MANUALEDGESTAR DWP61ES COUNTERTOP DISHWASHER OWNERS MANUAL – PDF FILE


EdgeStar DWP61ES Countertop Dishwasher Service Support 1

Removing The EdgeStar Outer Shell
Removing The EdgeStar Washing Cabinet
EdgeStar Dishwasher Component Parts Identification


EdgeStar DWP61ES Countertop Dishwasher Service Support 2

EdgeStar Low Water Pressure Troubleshooting
EdgeStar Water Temperature Troubleshooting
EdgeStar Wash Pump Assembly Troubleshooting
EdgeStar Outlet Pump Assembly Troubleshooting

EdgeStar Dishwasher DWP61ES Front Back and Accessories View

EdgeStar Dishwasher DWP61ES Control Panel Functions

EdgeStar Dishwasher Parts can be found on EdgeStar.com

EdgeStar Dishwasher Parts can also be found at AppliancePartsPros.com

EdgeStar Dishwasher PartsEdgeStar Dishwasher Parts – Appliance Parts Pros

Need help with your EdgeStar Countertop Dishwasher? Need Parts? Please leave your question below and a technician will reply back to assist you.

Leave a Reply

5 thoughts on “EdgeStar Countertop Dishwasher Error Codes – Owners Manual – Parts”

  1. Maegan Bowden

    I have read through all instructions, in my own manual. I have the edgestar countertop dishwasher that has buttons to select cycles and start, not the dail. My dishwasher is STUCK on P2, I have tried to turn it off, even unplugged it for 15mins, and still suck on P2. What can I do to get it going again??

  2. Hello,
    I have read everything above including other’s questions.
    My Edgestar has been a little soldier. Today, it lights up, I can choose a cycle or time, the door latches, all the hoses and wires seem fine. But the start button will not engage. Not even continuous pressing, or random pressing or repeated pressing, it just wont respond.

    It could be just dirty ? and if just dirty could I take the front panel off and clean it? It has way passed any warranty time.

    Thank you very much for your consideration.
    EH

  3. Two days after the 30 day return period my edgestar countertop dishwasher started beeping with E4 error code. It will attempt to drain, and then sit there with the pump going for a while. If I turn it off it will turn itself on again.

    I’ve tried soaking vinegar and baking soda and then rinsing through with hot water several times. It is able to drain, but it will not complete the drain cycle or something.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.