Home » Home DIY Repair » Home Air Conditioning » Gree Mini Split Air Conditioner Error Codes

Gree Mini Split Air Conditioner Error Codes

Full list of Gree Air Conditioner Mini Split Units Fault Codes. When error codes appear on the Gree air conditioner indoor display, this tells the user there is an issue with the Gree AC unit. The error code displayed will inform you of the issue or problem that is occurring with the air conditioner. Knowing what the error code means and its definition will help you to understand and troubleshoot the exact Gree air conditioner part that needs to be fixed, cleaned, repaired, or replaced. You can then clean, fix, or replace the Gree part yourself and save money. See below for all error codes that can occur on Gree Mini Split AC’s.

Gree Mini Split Air Conditioner Error Codes - How To FixGree Mini Split Air Conditioner Error Codes – How To Fix

 

Gree Viero AC Mini Split PDF Owners and Troubleshooting Manual
GREE DUCTLESS AIR CONDITIONING & HEATING SYSTEM INSTALLATION MANUAL

 

 

Gree Mini Split Air Conditioner Part Names and LocationsGree Mini Split Air Conditioner Part Names and Locations
INDOOR AND OUTDOOR UNIT

The Gree Air Conditioning Vireo System has onboard error code diagnostics. The outdoor unit will provide status indicators and the indoor wall unit and remote control will display error codes. The following is a summary of the codes with explanations…

GREE AC DIAGNOSTIC ERROR CODES

Gree Vireo Mini Split Air Conditioner Error Code F0
Refrigerant Leakage Protection
1) Refrigerant leak(s).
2) Indoor coil temperature sensor not calibrated.
3) Refrigerant flow is restricted (ex. valve, exv, debris)
Outdoor Unit Red Light Indicator – 9 flashes and 1 sec Off

Gree Vireo Mini Split Air Conditioner Error Code E1
System High Pressure
1) Over charged with refrigerant.
2) Blocked or dirty outdoor coil.
3) Extreme outdoor ambient conditions

Gree Vireo Mini Split Air Conditioner Error Code E2
Indoor Anti-Freeze Protection
1) Low return airflow.
2) Indoor fan speed is too low.
3) Indoor coil is blocked or dirty.
Outdoor Unit Yellow Light Indicator – 3 flashes and 1 sec Off

Gree Vireo Mini Split Air Conditioner Error Code E4
Compressor High Discharge Temperature Protection
Please refer to the malfunction analysis (discharge temperature, overload) in service manual.
Outdoor Unit Yellow Light Indicator – 7 flashes and 1 sec Off

Gree Vireo Mini Split Air Conditioner Error Code E5
Overcurrent Protection
1) Supply voltage is unstable.
2) Supply voltage is too low and system load is too high.
3) Indoor coil is blocked or dirty.
Outdoor Unit Yellow Light Indicator – 5 flashes and 1 sec Off

Gree Vireo Mini Split Air Conditioner Error Code E6
Communication Malfunction
1) Communication cable is wired incorrectly between indoor and outdoor units.
2) Indoor or Outdoor control board malfunction.
Outdoor Unit Yellow Light Indicator – Continuous On

Gree Vireo Mini Split Air Conditioner Error Code E8
High Temperature Resistant Protection
1) Incorrect refrigerant charge level.
2) Refrigerant metering device malfunction.
3) Compressor malfunction.
Outdoor Unit Yellow Light Indicator – 6 flashes and 1 sec Off

Gree Vireo Mini Split Air Conditioner Error Code EE
EEPROM Memory Malfunction
Control board malfunction.
Outdoor Unit Yellow Light Indicator – 11 flashes and 1 sec Off

Gree Vireo Mini Split Air Conditioner Error Code C5
System Configuration Malfunction
1) No jumper cap inserted on the control board.
2) Incorrect or damaged jumper cap on control board.
3) Indoor and outdoor units are not compatible.

Gree Vireo Mini Split Air Conditioner Error Code Fo
Pump Down or Gathering Refrigerant Status
Optional Service Mode
Outdoor Unit Yellow Light Indicator – 17 flashes and 1 sec Off

NOTE: All of the Gree Air Conditioner Model Numbers below are applicable for the error codes on this page…
Gree AC Vireo Models: VIR09HP115V1A, VIR12HP115V1A, VIR09HP230V1A, VIR12HP230V1A, VIR18HP230V1A, VIR24HP230V1A, VIR30HP230V1A, and VIR36HP230V1A.

Gree Mini Split Air Conditioner Error Codes 1Gree Mini Split Air Conditioner Error Codes 2Gree Mini Split Air Conditioner Error Codes 3Gree Mini Split Air Conditioner Error Codes 4Gree Mini Split Air Conditioner Error Codes 5Gree Mini Split Air Conditioner Error Codes 6Gree Mini Split Air Conditioner Error Code Charts

 

Gree Mini Split AC Remote Control Button NamesGree Mini Split AC Remote Control Button Names

 

Gree Mini Split AC Remote Control Icons Display ScreenGree Mini Split AC Remote Control Icons Display Screen

 

Gree Mini Split Air Conditioner Air Filter Cleaning ProcedureGree Mini Split Air Conditioner Air Filter Cleaning Procedure

Gree Viero AC Mini Split PDF Owners and Troubleshooting Manual
GREE DUCTLESS AIR CONDITIONING & HEATING SYSTEM INSTALLATION MANUAL

Need help with error codes on your Gree AC? Please leave a question below and we will be happy to help.

Leave a Reply

37 thoughts on “Gree Mini Split Air Conditioner Error Codes”

  1. I have a GREE mini-split, purchased through Home Depot 6/10/20, installed Aug. 2020, failed 6/4/21, contacted support about 6/12/21 – only warranty after one year is parts. One repair person looked at it and said that the indoor unit not communicating with the oudtoor unit is a common issue. First error code was E4, then E6. After about 2 months, I received parts, sent to the repair person. Once those were installed, it ran for somewhere between an hour and a few hours, then produced E4. Turned power off and on, and it ran again for a short time, then displayed E6. E4 seems to be due to a faulty thermistor. Cost has doubled since purchase, and I would rather do this repair myself, but I don’t think I can buy parts. If, as the repair person said, this issue is likely to recur, it is not worth the cost of repair. (which defeats the purpose of reducing energy consumption due to mfg. waste) Do you have any options or suggestions? With some experience in computer hardware, can I remove and replace the board with the thermistor, and is there a source to purchase one? Or should I take this to a landfill??

  2. It has started getting cold here and I tried to turn the heat on on my Gree HVAC Unit but it just reads an error that looks like EE on the mini split, it will not blow any air out. What do I need to do?

  3. Graciela Zamora

    My Gree mini split stopped working no heat no a/c I 88 and it turns off then back on but no air
    Please help I need heat.

  4. i just installed a new gree ac/heat in and it goes to F4, it dont blink and it dosent change colors. help

  5. Hi split AC system shuts down on heating mode.
    Heating symbol periodically flashing on unit display.
    Usually does this in the early morning hours, when coldest outside.
    Won’t restart for 4-6 hrs, any help appreciated, Thanks.

  6. I need help with a Gree Vireo. The indoor unit is not showing any codes and is not cooling. The outdoor unit is flashing red light 8 times and off 1. Yellow light flashes 1 and off 1. The green light flashes 1 off 1, flashes 2 of 1, flashes 3 off 1 and then repeats. Can anybody shed some light on what is wrong and how I need to go about addressing the issue.

  7. ALLEN VETTER - DIY Repair Assistant

    Ennis Harrison,

    Gree AC MINI Error Code FO

    GREE F0 Error Code = Failure to protect the system without gas.

    What happens? The AC stops working.

    What can cause the FO error code?
    Gas leak.
    Indoor staging sensor issue.
    Incorrectly installed.
    Compressor issue.

    Other type of FO error = The cooling (LED) LED stops for 3 seconds and blinks 10 times.
    What can cause the FO error code?
    Gas leak
    Check and fix gas leak location.

    -RR

  8. Ennis Harrison

    Gree AC MINI Error Code FO
    What do we need to do?
    Cant get this code to turn off.

  9. Hello sir,
    I have gree inverter Ac last year I used this and in this year I start again maybe after 5 month and and now my ac is show U5 error ,
    Can you help me and tell me what is the problem?

  10. DEBORAH MORRICK

    It says F0 on the inside readout for my Gree A/C and Heat Unit. However , there is nothing showing red or yellow blinking outside. The unit has not been installed very long. IT has been approximately 11-12 months old .

  11. Mine shows F0 error message, but I’ve been running it on Heat. I don’t use it for A/C. It’s in a finished basement. Why would refrigerant be running low?

  12. ALLEN VETTER - DIY Repair Assistant

    Mia,

    Gree Vireo Mini Split Air Conditioner Error Code E6
    Communication Malfunction
    1) Communication cable is wired incorrectly between indoor and outdoor units.
    2) Indoor or Outdoor control board malfunction.
    Outdoor Unit Yellow Light Indicator – Continuous On

    -RR

  13. E7 fixed when all zones are set for Heat – came on when I started turning on the heat for winter. I assume this will happen again when it’s time for AC to work again

  14. i have a gree mini split model viro9hp230v1b the unit in the bedroom reads E 7 what does that mean?

  15. I just had a Gree mini split system installed with 3 indoor units. The heat in one room will only come on if the living room unit is on, and the other unit doesn’t get warm at all. When I shut off the living room unit the other two will show E1 error codes. I’m so frustrated. The guy who installed can’t figure out the problem and it’s been several months since he put in the system

  16. My Gree has b7 on the display panel. Did not see this error in the list. What could cause this error?

    Thanks

    Paul

  17. I would like to know why my remote doesn’t return the outdoor ambiant temperature, when promted it gives me the set temperature?

    Module GWH18QD-k3dna5b,

  18. Guadalupe Diaz

    I have a GREE 24BTU’s. When I turn it on it shows L3. I don’t know what it is. Thank you

  19. I HAVE AN INVERTER GREE 18000.
    DISPLAY SHOWS ERROR “HP”.
    I AM NOT SURE WHAT THIS MEANS.

  20. I have a Gree Splitunit Arco 12000 BTU. I need a new compressor and the code number
    to star it with my new remote control
    Thank you

    Jani Thijsen

  21. DIY Project Help Tips

    Kashif Minhas,
    Gree AC Error Code H3 = Compressor Overload Protection.
    Check compressor and relay.
    Check for damaged or loose wiring inside AC unit.

    Do you know how to use a multimeter?
    -RR

  22. Problem with Gree Heat and Cool Air Conditioner inverter:
    Sometime it’s not cooling
    After close it half an hour it’s begun work but sometimes it doesn’t work.
    Sometimes it works after 3 or 4 hours.
    Sometimes error code H3 displays.
    Sometimes it doesn’t work whole a day
    I’m very upset.
    Please solve my problem if you can.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.