Home » Home DIY Repair » Washing Machine Repair » How To Clean The Door Gasket (Diaphragm) On A Front Load Washer

How To Clean The Door Gasket (Diaphragm) On A Front Load Washer

What is the best method to clean a washer door boot gasket? Most front loading washing machines have a large grey gasket or diaphragm seal around the door. This gasket or door boot is what keeps the water from flowing out of the washer when in use. This is one part of the washer that needs to be cleaned and stay dry to avoid it from ripping, cracking or getting mold/mildew build up. Below we will show you how to care, maintain, and clean your front load washer door gasket.

How To Clean Front Load Washer Door GasketHow To Clean Front Load Washer Door Gasket

TIP: It is a good practice to keep the front load washing machine door open when not in use. This is done to keep the inside of the washer dry and prevent mold or water damage on the door gasket. Also, after each use of the washer, wipe down the diaphragm inside and out so no water sits in or on the gasket. Prolonged water sitting in or on the washer diaphragm will eventually get mildew, mold and or damaged from the water. If mold grows on your washer door gasket, try to clean it off immediately. If mold or water damage has eaten away at the rubber diaphragm, it may need to be replaced as it will begin to smell and or leak water.

How to clean rubber gasket on front load washer

How To Prepare A Front Load Washing Machine Door Gasket (Diaphragm) For Cleaning.
1. Make sure the washer is turned OFF.
2. Open your front load washing machine door.
3. Be sure that the washer is completely empty.
4. Be sure there are no substances on the grey diaphragm between the washer lid and the washer drum.
5. Check the diaphragm by turning it outward to be able to see the full gasket inside and out.
6. Remove are any foreign substances on or in the gasket such as socks that are stuck, leftover detergent, hardened soap, or mold.
7. Inspect the diaphragm for any areas that may be stained or discolored.
8. If you find any area that is stained, remove the stain or stains using the cleaning procedure below…

How To Clean A Front Load Washing Machine Door Gasket (Diaphragm).
a. Wear rubber gloves as you will be using bleach when cleaning the washer door diaphragm.
b. Use caution and combine ¾ cup of liquid chlorine bleach with 1 gallon of warm water.
(NOTE: Refer to the bleach bottle labeled instructions for proper use.)
c. Carefully wipe down the diaphragm area with this dilute solution using a damp wash rag.
d. Wipe down the inside and outside of the gasket to clean the whole area to prevent or remove mold.
e. Once the gasket is fully wiped down, let the bleach and water solution sit on the diaphragm for 5 to 10 minutes.
f. Next, wipe the area thoroughly with a dry cloth to remove the bleach and water solution.
g. Finally, let the washer door stay open to let the inside of the washing machine air dry.
h. If you find the washing machine diaphragm damaged, see below for replacements.

 

Washing machine door gasket replacementsWashing machine door gasket replacements

 


Washing machine gunk in gasket on Front Load Washers – How to clean & remove?

 


How to replace washer gasket for front load washers

Need assistance with your front load washer? Please leave a comment below and we will assist.

Leave a Reply

2 thoughts on “How To Clean The Door Gasket (Diaphragm) On A Front Load Washer”

  1. Rebecca Hazelton

    My Samsung steam vrt front loader keeps throwing a 4E code after the wash cycle. Both hot and cold water flow out fine. There are no kinks in any hoses. I’ve removed ALL interior hoses individually and cleaned and assured they are running fully ( that included removing and cleaning hose inlet filters). The drain hose is clear and not clogged. I’ve also replaced the water sensor.
    Any other suggestions? I’d like to fix this myself but am running out of logically explanations for this code.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.