Home » Home DIY Repair » Air Conditioner Repair » How To Reset AC Split System Air Conditioner AIRCON With Error Codes

How To Reset AC Split System Air Conditioner AIRCON With Error Codes

My Split system AC has an error code that I cannot understand or find anywhere online. There is no technician available in my area to come out and troubleshoot my AC system. My AC has an error code and my AC is not blowing cold air. Is there a way to completely reset the split system AIRCON and attempt to clear the error code? My AC is not working right now and it is the hottest time of the year.

Reset An AC Split System AIRCONReset AC (AIRCON) Split System Air Conditioner

If any error codes show on your split AC display, you should look up the error code in the service manual and find out what the exact issue is. Once you know the exact error code issue, you can either clean the AC unit, reset the unit, or replace a part that is causing the fault in your AC unit. See the bottom of the page for AC error codes for different AC brands. If you cannot find the error code definition and want to try to reset the AC unit you can attempt to reset the AC unit by turning OFF the main switch on your outdoor unit.

Note about this procedure: This POWER OFF/POWER ON procedure is for attempting a reset after an error code shows on your AC display. Resetting (powering down) the AC unit MAY clear the error code depending on what the error code is. The method on this page can be considered a first step when troubleshooting a split AC unit showing an error code.

It is recommended to find out what the error code is and HOW TO FIX THE AC UNIT SO THE ERROR CODE CLEARS. If you know what the error code definition is, you do not have to try this method, simply follow the directions for how to clear the error code by following the AC unit service manual or from a HVAC professionals advice.

Remember, not all split AC units are the same, some steps may be slightly different when attempting the POWER OFF/POWER ON reset method so please be aware of this. Also, please always use caution when working with electricity as high volts can be a hazard.

Turning off the main outdoor ON/OFF switch will cut electrical power to the main board and clear the memory of the air conditioning functions which may clear it and or erase/reset the error code.

ON OFF Switch For AC System To ResetON OFF Switch For AC System To Reset

How to Reset An Air Conditioner Showing Error Codes:

  1. Go outside to the outdoor AC unit.
  2. Find the main ON/OFF isolator switch on the unit (or possibly on the wall near the AC unit).
  3. Turn the main switch to the OFF position.
  4. Leave the switch OFF for 60 minutes.
  5. After 60 minutes, switch the main switch back to the ON position.
  6. Turn the master controller back ON.
  7. Inspect to see if the system runs normally.
  8. Look at the display panel for any error codes that appear.
  9. If the AC now works properly, it is reset and working properly.
  10. If error codes still appear on the display, find the brand of the AC below and click the link to find out what the error code is.


Reboot Air Conditioner – Reset Power to your A/C

 


How to Reset Your Air Conditioner Unit

WHAT NOW?: If the error code remains after resetting the power, find out what the error code means (see the AC error code links below) or call a professional.

NOTE: Different AC split system brands have multiple methods to fix error codes, see below for more help.

Find error codes and definitions for Split System AC Systems:

Carrier Split Air Conditioner AC Error Codes

DAIKIN Air Conditioner AC Error Codes

Midea Air Conditioner Error Codes List and Definitions

Samsung Split System Air Conditioning AC Error Codes

LG Split System Air Conditioner Error Codes

Lennox Split AC Heat Pump Error Codes

Gree Mini Split Air Conditioner Error Codes

Fujitsu Air Conditioning AC Error Codes

Mitsubishi Air Conditioner AC Error Codes

ComfortStar Split System AC Error Codes And Troubleshooting

Pioneer Air Conditioner AC Mini Split ERROR CODES

Daewoo Split Air Conditioner Error Codes

Senville Split System Air Conditioner Error Codes

Common Reasons A Split AC Air Conditioner Displays Error CodesWhat might cause an error code on a split AC unit?

Common Reasons A Split AC Air Conditioner Displays Error Codes:

  • The AC system needs refrigerant recharge
  • Circuit breaker outside has tripped
  • Air filters are dirty
  • Fuse blown
  • Power in your area may be out or being serviced
  • Fault internally in the AC unit
  • AC unit may be in defrost mode
  • Delayed compressor after restarting the AC unit
  • Fan start may be delayed on heating mode
  • AC system is old – parts wearing out
  • Technical problems
  • Weather causes issues
  • Animals may have destroyed controller wiring
  • AC not turned on at the control panel

ASK YOUR QUESTION BELOW – PLEASE GIVE US THE TYPE OF APPLIANCE, BRAND OF APPLIANCE, AND THE MODEL NUMBER.

Simply ask your question using the comments form below (It is free and you do not have to register!) and we can troubleshoot your appliance problem ASAP.

Leave a Reply

5 thoughts on “How To Reset AC Split System Air Conditioner AIRCON With Error Codes”

  1. I have an Air Con system. It has and error code of HS or H5. It will not blow cold and the snowflake representing cold keeps blinking. I’m melting in S.Florida please help!

    Thank you.

  2. Maurice Pereira

    I have a AIR-CON series BLUE 2 18,000 BTU’s.
    I am almost positive that using the A/C mode last year in the auto mode when I set the temp for 74 degrees (or any temp) that when it reached the temp, the unit would stop blowing till the room got warmer then come on again.
    Now this year I don’t feel it doing that, it will just blow the air.
    I called AIR-CON one guy said to disconnect power for hour and let him know it worked, I called back to say no and another guy said the unit DOES NOT WORK that way.
    Why would they have AUTO version and also fan speed hi-med-low?

  3. Hi ,we bought a house with a Kogan split system which is now about 2 years old. The model is Kassac26R3A and it’s displaying P5 error.
    Has anyone had this issue or anyone has a solution to it ?
    Thank u
    Tania

  4. Salvador B. Cabansay

    Good day, i just want to ask about my a/c unit model NT187Sk3 , When turn on there is no alarm desplay on the indoor unit, indoor unit running but the outdoor unit will run for 5 seconds only, only fan is running but the compressor is not, outdoor pcb led red light blinking first 6 times and second time 7 times, please i need your adviced about this problem, thanks

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.