Dryer Will Not Heat Up – Dryer Repair Help

My dryer will not heat up. Everything else works but it will not heat and dry my clothes. My dryer is an older model and has been working fine for years. What are the most obvious parts or components that can fail and cause this heating issue?

dryer will not heat upDryer will not heat up – How to troubleshoot?

Safety Note: When troubleshooting a dryer that will not heat up (removing panels, testing fuses, elements, thermostats) remember to unplug the dryer for safety reasons.

Tools Needed To Troubleshoot Dryer Not Heating:
– Screwdriver (to remove parts from wiring)
– Multi-meter (to check for faulty parts)
– Crescent Wrench (if needed for side panel)
– Socket Wrench (if needed for side panel)
– Flashlight (optional)
– Safety Gloves (optional)

Is The Dryer Getting The Needed Voltage?

Is the dryer plugged in?
Is the power cord damaged or faulty?
Inspect that the cord is still securely attached to the dryer.
(The dryer electrical cord can be damaged when the dryer is pulled out from the wall)
Check the circuit breaker box and or the fuse box.
Be sure all breakers are in the proper position and not tripped.
If you have a fuse box, check the fuses with a meter.
How To Wire A Dryer Power Cord
If you know the dryer is getting the correct power or voltage, continue troubleshooting below…

Is The Dryer Venting System Blocked With Lint?

If the dryer vent hose is clogged with lint, your dryer will struggle to dry your clothes.
Check the dryer lint filter that is located inside the dryer.
Be sure the lint filter is clean and free of all lint.
Make sure the vent hose and where the hose connects to the dryer is clear of all lint.
Take the vent hose off from the wall and check for any lint blockage.
Use a canister type of vacuum and vacuum out all lint from all areas.
How To Fix Dryer Venting Issues
If you know the dryer is clear of all lint blockage, continue troubleshooting below…

Is The Thermal Fuse Faulty/Blown?

Most dryers contain a thermal fuse for safety reasons.
If this thermal fuse blows or is faulty, the dryer will not heat.
Remove the panel and find the location of the thermal fuse – check dryer manual if needed.
Test it with a meter for continuity to be sure it is in working order.
How To Fix Thermal Fuse On Dryer
If the thermal fuse is in working order, continue troubleshooting below…

Dryer thermal fuse - dryer troubleshootingDryer thermal fuse – dryer troubleshooting

Is The Dryer Heating Element Faulty?

The dryer heating element is the part that gets hot and allows the dryer to heat.
If this element is faulty, the dryer will not heat up.
Remove the panel and locate the heating element and test it with a multimeter – check dryer manual if needed.
Using the multimeter and getting a reading of infinite resistance means the element is faulty and needs to be replaced.
Dryer Heating Element Repair
If the heating element is in working order, continue troubleshooting below…

Dryer heating element - dryer troubleshootingDryer heating element – dryer troubleshooting

Is The Dryer Thermostats Or Timer Faulty?

The thermostats in your dryer, if faulty, could be the issue of no heat.
The timer in the dryer, if faulty could also be a cause for no heat.
Open the dryer by removing a panel and locate the parts – check dryer manual if needed.
Locate the thermostats and check them with a multimeter.
Check the thermostats for continuity – The reading should show zero or infinity.
Locate the timer and test it with the meter.
Using the meter, the timer should show from 2000 to 3000 ohms if working properly.
Remove and replace the thermostat or timer if not in working order.
Dryer Not Heating – Thermostat Repair
If the thermostats and the timer are in working order, continue troubleshooting below…

Dryer thermostat - dryer troubleshootingDryer thermostat – dryer troubleshooting

Dryer timer - dryer troubleshootingDryer timer – dryer troubleshooting

Is The Wiring In The Dryer Secure/Not Burned?

The wiring in the dryer can come loose or get burned from the heat.
Check inside the dryer for melted wiring.
Inspect the wiring where it connects to components and parts.
Check for anything that may be loose and tighten with your screwdriver.
If you find burned or melted wiring, replace the wiring.
Dryer Wiring – Dryer Will Not Start
If the wiring is in working order, read below and send us a comment…

Dryer wiring kit - dryer troubleshootingDryer wiring kit – dryer troubleshooting

 

Dryer Wiring and Parts View - Dryer Will Not Heat TroubleshootingDryer Wiring and Parts View

Please Note: The repair and troubleshooting methods above are generalized for most dryers including Kenmore, Hotpoint, Emerson, Maytag, GE, Whirlpool, Samsung, LG, Haier, Sharp, Bosch, KitchenAid, Frigidaire, Toshiba, Panasonic, Amana, Asko, Beko, Electrolux, Fisher & Paykel, Speed Queen, Miele, SMEG, Summit, and Zanussi dryers.

If the above “dryer not heating” repair methods have not solved the problem with your dryer, leave a description of your issue with the model number of your dryer below in the comments. We will help you solve the issues you are having with your dryer not heating.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.