Dryer Does Not Catch Lint And Takes Long To Dry

Dryer takes a long time to dry. I have a Kenmore dryer that is taking too long to dry my clothes. I have also noticed that the lint filter is empty. So my dryer does not catch any lint. Even after drying the clothes many times, the clothes are not dry and there is no lint in the lint filter. I have cleaned out the air vents on the back of the dryer so that is all cleaned out and no blockages. What else can cause this to happen besides an air vent blockage?

Dryer Does Not Catch Lint And Takes Long To DryDryer Takes Long To Dry – Not Catching Lint

Dryer has lint buildup inside the dryer. Dryer does not dry clothes and no lint is in the lint filter. If the vents behind the dryer have been cleaned out, then the issue is most likely in the dryer itself.

A large lint blockage is blocking the dryer inside. At times, a dryer can get clogged internally and the lint builds up inside and cause this exact issue. You will need to take the back panel off and have a look.


How To Clean A Clothes Dryer Internally

How To Remove Lint From Inside Dryer:

  1. Remove the power to the dryer
  2. Remove back or front panel (depending on model of dryer) with screwdriver or nut driver
  3. Check inside the dryer for lint buildup
  4. Use a shop vac and vacuum out all lint blockage
  5. Clean out the dryer of any foreign objects
  6. Recheck the dryer vent hose for any lint buildup
  7. Vacuum out any lint that is present in the dryer air vent hose
  8. Reinstall back or front panel (depending on model of dryer) to dryer
  9. Plug the dryer back into power
  10. Test run the dryer with some wet clothing

Dryer has lint buildup insideDryer has lint buildup inside

If the dryer runs and drys your clothing, then you have fixed the dryer not drying issue.
If not, there are a few other things that may be wrong.

What Else Can Cause a Dryer To Not Dry Clothes?

There may be an issue with the blower fan or the drum may not be turning. A broken belt will cause this. This would mean the motor runs but the drum is not turning.

If this is the case, the clothes will never get dry and the lint filter would not catch any lint. Check the Dryer Drum Belt.

Another issue could be that if you use heavy fabric softener and or dryer sheets. These products use wax that can cause a build up on the lint filter. This can block airflow through the lint filter and cause issues.

Always use caution when working with electrical appliances, unplug the appliance when troubleshooting any issues.

Do you have dryer problems? Need answers with a dryer not drying clothes? Please leave your comment below and we can help. Please leave the model number of your dryer and full list of problems you are having.

2 thoughts on “Dryer Does Not Catch Lint And Takes Long To Dry”

  1. Hi. Did you ever figure out your dryer problem? I am having the same issue as you. Long dry times and little to no lint, sometimes just a little at the bottom.

  2. Hi. I have followed the steps of removing back panel and lint hose & vacuumed out everything. It at first had a burning smell when i cut it in after. I put in a load of a small dog bed and 2 towels to dry & it is still taking more than one cycle to dry. (Even the regular clothes load) what else could it be? I noticed that the lint trap (is located on top of ge amana dryer) is catching lint but only at the bottom. I have to drag it out carefully if that makes sense.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.