SPT dishwashers are reliable and compact. If you need parts for your SPT dishwasher to repair it yourself you can find them here. If your SPT dishwasher is leaking water or you need the faucet adapter, answers and parts can be found here. We will list all SPT dishwasher model numbers along with the manuals so you are able to do repairs and use the manual to troubleshoot problems. The place to get parts for all SPT dishwashers is Sunpentown. We will list the SPT model numbers below along with all the parts available to fix your dishwasher yourself.
If your SPT dishwasher is leaking, see the image below as it shows all the parts that may be causing the leak. A part may be loose, cracked, or missing. Find any replacement parts using the parts links on this page.
SPT Dishwasher Leaking – Check parts in image for where leak appears.
Here is a model number list for all SPT dishwasher parts.
Click on the model number of your SPT dishwasher to find and purchase parts.
Replacement parts for SPT Dishwasher Model Number SD-2201S/W
Replacement parts for SPT Dishwasher Model Number SD-2202S/W
Replacement parts for SPT Dishwasher Model Number SD-2213S/W
Replacement parts for SPT Dishwasher Model Number SD-2224S/W
Replacement parts for SPT Dishwasher Model Number SD-9241SS/W
Replacement parts for SPT Dishwasher Model Number SD-9252SS/W
SPT Countertop Dishwasher Parts
SPT Dishwasher Manual SD-2201 – PDF FILE
If you need the SPT dishwasher faucet adapter, it can be found here (SPT faucet Adapter).
Here is troubleshooting for SPT diswashers. See the images below as they will show what the problem is and how to solve and fix the problem yourself.
Below are error codes for SPT dishwashers. This small chart shows the 3 in 1 and glass light issues.
SPT Dishwasher Error Codes
If you need help with your SPT dishwasher, please leave your question below and we will assist you in troubleshooting the issue further.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
When the dishwasher is turned on and a setting is selected it will start the cycle but will not finish it and continues to beep and seems to be going back and forth restarting the cycle but not finishing it, does this for all settings selected
We have an SPT SD-9241W Energy Star Portable Dishwasher that is having issues with the faucet adapter. It worked fine for a couple of months but when I connected it this evening and turned on the washer, the connector hose blew off from the water. Now it’s finally working, but it’s leaking a bit of water. Do we need to replace the faucet adapter?
The SPT countertop dishwasher run time is already over 1hr, on 3dish setting, has not stopped. I turned it off and restarted on the end setting that I thought was the drain dry, appears to be washing again, hopefully a rinse.
When I turn on my ensue countertop dishwasher…. the setting goes to “ mini part” and blinks and beeps and I’m unable to switch settings…. any ideas?
My is doing the same. Door open or closed. I turn it on then it turns off then a few seconds later it turns back on. Then all types of craziness with the lights then off and on again. Absolutely nothing online about this. I unplugged the dishwasher and used an entirely new outlet fearing it was a grounding issue. I am just wondering if anyone found a resolution to this issue?
I tried my new dishawasher and the “mini party” mode light is flickering. I checked the manual and it says overflow. So I disconnected water source, unplugged it, dried the inside of the washer and tried to restart it but it will not restart. I also drained and cleaned the drain inside the washer and it still won’t restart. The washer was working until an hour after when the light flickering started. I called the number for support but the office is closed. What am I missing here?
My dishwasher is leaking from the bottom of the unit from a pre drilled hole