No light in refrigerator? If your refrigerator is working properly overall such as the fridge is cooling and the freezer is freezing, but the light in fridge or freezer does not work, here is how to fix it.
Usually this means the light bulb is bad. This may seem simple but many times it can be another problem and simply replacing the refrigerator light bulb will not fix the problem. Below we will show you the most likely issue so you can fix the light yourself.
Refrigerator Is Working But Light Is Not Working
No Light In Refrigerator
1 – Replace the refrigerator light bulb(s):
If the light in your refrigerator is not working, obviously the first thing to do is remove the light and replace it with a new one. If you do not have an extra light bulb for your fridge, simply check the bulb to see if it is bad by checking the filament. Shake the bulb lightly, do you hear the small pieces moving around? If so it is bad. Replace the bulb.
If replacing the light bulb does not bring light into the fridge, BE SURE THE LIGHT BULB IS GOOD… If so you either have a bad light bulb socket, a door switch issue, or a wiring issue somewhere in the refrigerator.
2 – Inspect, test and or replace the refrigerator light bulb socket(s):
Check the light bulb socket to be sure it is in working order. You can usually check visually by looking for any discolored or bent terminals, wires that are damaged, wires that are not connected, a cracked light socket, or a damaged light socket from heat over time.
These issues can make it so the connection from socket to bulb does not allow the bulb to illuminate. Remember to remove power before inspecting or checking a light socket in your refrigerator as it still has voltage going to it even if not working properly.
Refrigerator Light Bulb Sockets
3 – Check that the refrigerator door switch is not faulty:
A refrigerator door switch is what lets voltage go to the light bulb or bulbs in your fridge when you open the door. If after replacing the bulb you get no light, and the light socket checks to be in working order, you need to check the fridge door switch.
The bulbs and light sockets may be perfectly fine, but if the door switch is faulty, it will seem like the inside of the fridge is not working. Depending on the model of your refrigerator, the door switch will be located somewhere on the interior edge of the fridge.
Carefully remove the door switch and check for continuity with a meter. This type of switch is a spring loaded switch and for electricians it is a “Normally Closed” type switch, meaning the switch should have no continuity when pressed in.
If you have new light bulbs, working light sockets, and the fridge door switch is in working order, then you may have a wiring issue and further troubleshooting is needed.
If you have gotten this far and you still have issues with “no fridge light”, please leave the model number of your refrigerator below and we will be happy to research the issue for you and give you some advise as to how to fix the problem.


I have a hotpoint model # CTX21DABRRWW that the light went. replaced bulb, put a new switch in and still no light. where do I go from here, thanks
I have a Whirlpool side by side model #WRS322FNAH01 ….refrigerator doesn’t cool and then after so long the freezer doesn’t either…i defrosted the freezer coils and they both worked for a few days and then the refrigerator stopped cooling….cool air comes through to the refrigerator when the freezer door is open….freezer and fridge lights also flicker sometimes….what can I do?
I have Sears Kenmore elite model 106.54782803 and light went out in fridge and replaced both bulbs and checked door switch but still no lights.
Weird that freezer light is out to.
Could it be that fixed is bad before I call repairman?
Rf265aabp Samsung refrigerator. The freezer light is out. Replaced the bulb and the switch. Any further advice?
I still have problems fixing my refrigerator light and it keeps turning itself on and off after an hour and it is not cooling to much.
My fridge model is master SJ-195L.
Hi,
I’ve been trying for awhile to figure out my “no light” problem. I tested the bulb in another socket and it lights up, I replaced the socket and switch and still nothing. Any help would be much appreciated. The model is Amana TL20MW. Thanks
I have a 2011 Kemore model 795.79304.901. The lights in the freezer and fridge go out. If I unplug it and plug it back in then the lights work. After about 1 hour or maybe sooner, not sure, when I open the fridge or freezer the lights don’t work. So it’s not the bulb, socket or door switch. Also the fridge is warm, but the freezer is temporarily keeping things frozen, 1 week, but at 40 ish degrees and the fridge is 50 ish. Therefore the ice maker is not working either. I removed the back panel and the coils are not frozen, the fan works and the channel to the fridge is clear, not clogged. I’m going to check the thermostat, but whats with the lights then? Any advise?