Free DIY appliance repair guides since 2013 Thousands of free guides · Tech replies within 72h
Fix It · Troubleshooting

Refrigerator Water Dispenser Not Working – How To Fix

If your refrigerator water dispenser is dispensing either no or slow water, here is what to check to fix it. (No or Slow Water from Dispenser) If your refrigerator is newly installed, make sure you push the water dispenser lever down for 3 minutes to get the water reservoir to fill up completely. Usually the water reservoir is located inside the fresh food section. Top mount refrigerator models do not apply because there is no water reservoir.

Refrigerator Water Dispenser Not Working

On most refrigerator dispensers whether it be a Whirlpool refrigerator, Frigidaire refrigerator, Samsung refrigerator, KitchenAid refrigerator, Haier refrigerator, Jennair refrigerator, GE refrigerator, LG refrigerator, Kenmore Elite refrigerator, or Maytag refrigerator, it should take on average 8 seconds to fill an 8 ounce glass of water.

If your refrigerator has no lights on the control panel and no water or ice, check power to the refrigerator.

If all of a sudden your fridge is not dispensing water:
Be sure the water line valve in the wall to the refrigerator is turned on or open. Usually a saddle valve or similar will be used to connect the fridge water supply line to your home water supply. This valve needs to be completely open so the refrigerator receives water. You should also check the water inlet valve on the back of your fridge. This is electrically operated and can be tested with a volt meter to see if it is working properly. Also be sure that the water line behind the refrigerator is not kinked or bent. If you recently pulled the fridge out, you may have bent the water supply line when you pushed the fridge back in place. It is also possible that a water line has become frozen inside the fridge and that is why the water flow is restricted. Check all water lines for ice and or restricted sections.

NEED FRIDGE DISPENSER PARTS? Here is a Replacement Dual Water Valve Kit = Quality Replacement Dual Water Valve Kit for Refrigerators with Water Dispenser and Ice Maker. Fits Whirlpool, Kenmore, Maytag, KitchenAid, Amana, Admiral, Magic Chef, Norge, Roper. (Installation Instructions Included in Kit).


Troubleshooting Why the Refrigerator Water Dispenser Is Not Working

You may also have a clogged water filter. This filter is either built into your refrigerator or it is “inline” of the water line behind your refrigerator. A clogged water filter will cause no water at all or very slow water dripping from the dispenser. Change the water filter and this will most likely solve your issue. Refrigerator water filters need to be changed every 6 months. Once you have replaced the water filter, test the dispenser. If the water flows as it should, then you have fixed the problem.

If the water dispenser is not working, but you know it is being supplied with water and has power, then a defective switch in the dispenser is most likely to blame. You may need to take the dispenser apart and troubleshoot the valve and or switches in the dispenser. You may hear a clicking noise or a humming noise if a switch or valve is defective.

If the water dispenser drips water constantly then you have a water valve problem. You can look up your refrigerator model online and find the switch or valve that you need to replace and DIY.

If there is a slight dribble of a few drops of water after using the dispenser, this is normal and due to a delay in the system.

If the water dripping from the dispenser is a big problem, you can purge the complete water tank and water line system. Use a large cup and press down on the dispenser for 3 minutes. This will remove trapped air that can cause the water dispenser dribble. You should also empty the recess grill (water catch) and clean out underneath it to prevent water dripping out and making a puddle on the floor.

refrigerator dispenser parts breakdown

Common refrigerator water & ice dispenser parts breakdown

NOTE: The water and ice dispenser in the door will not work if the refrigerator door is open.

Remember, when troubleshooting a water no flow issue with your refrigerator, disconnect power and turn off the water supply for safety reasons.

If you know of other reasons a refrigerator stops dispensing water or ice, please leave a comment below to assist our other readers.

Keith Schneerer

Written by Keith Schneerer

Certified Appliance Tech · Founder, RemoveAndReplace.com

Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.

More about Keith →

168 thoughts on “Refrigerator Water Dispenser Not Working – How To Fix”

  1. My Kenmore refrigerator water dispenser continuously puts out water.
    Had to turn the water valve behind frig. off.
    I move the Micro switch from the water dispenser to the ice dispenser and it worked.
    So maybe the microswitch is not bad.
    I interchanged them two times to be sure that they both worked so it appears that is not my problem.
    I was thinking maybe the water pump I replaced a year ago is bad and stuck open for just the water dispenser.

  2. My water supply is frozen at the site of the water filter. Even the filter is frozen. Not sure what to do…

  3. I have a GE Profile Performance side by side refrigerator that suddenly stopped dispensing water. Sort of. The ice maker still makes ice and the ice dispenser still works. When the water dispenser is pressed, the light comes on, but only about a teaspoon of water comes out and then it stops. If I wait about an hour, I can get another dribble of about a teaspoon. I replaced the filter and that didn’t help. I then installed the filter bypass just in case I had a faulty filter. Still nothing. Any ideas on how to troubleshoot this?

  4. Jerome d Cole

    I have a hot point model HTS17BBMDRWW I HAVE WATER THAT IS ON TOP OF CRISPER PANEL AND FREEZES

  5. I have a Maytag Model : MFD2561HES 25 Cu. Ft. French Door Bottom-Freezer Refrigerator
    when I replace the old filter to a new one there was no water coming at all . Purchased several filters same
    issue no water coming . I do not think the Water inlet Valve is bad , cause with the old one still working
    its slow but working . I’m sure I got the correct filters I have this refrigerator for many years.

  6. DIY Project Help Tips

    Steve in NC,
    Try putting the old water filter back in and see what happens.
    If it works fine then you need the exact water filter replacement.
    If not then you may have an issue with water hammer and need to fix the issue.
    This article may assist you from what you have described as your issue.
    -RR

  7. I have a Samsung RF4287HARS ‘French Door’ refrigerator.
    All was working fine till we replaced the filter.
    It worked for a few seconds.. then a loud noise came from behind the fridge, like a short burst, or rapid hammering; then just a trickle then nothing.
    I’ve used three different filters now, same thing.
    All three of the new filters (including the Samsung filter) do look slightly different than the old one we took out.
    Water inlet valve?
    Water filter housing?
    Air in the water line?
    Maybe something else completely?

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.