I have a Whirlpool Cabrio washer about a year old. When I run a wash cycle it gets stuck in constant loop of wash cycles going on and on. The washer would begin to soak the clothes right after the spin cycle and then go through the entire wash cycle once again. To stop this I had to turn the washer off. Is there a reset I could follow to stop the endless wash cycle or do I need to replace parts?
Whirlpool Cabrio Washer Stuck In Wash Loop – How To Reset
Yes, there is a reset procedure to fix this. The Whirlpool Cabrio washers need to be reset in a different method than many other types and brands of washers. Here is how you can RESET your Cabrio washer (all Whirlpool Cabrio models). Follow the directions below and your washer should reset and begin to work normally. This reset procedure works on ALL Whirlpool Cabrio Washers that start with model number WTW.
How To Reset Whirlpool Cabrio Washer:
- Turn the washer off.
- Set the mode selector dial to NORMAL.
- Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).
- Now press the start button.
- All the cycle indicating lights should be illuminated.
- Press the Start Stop button once.
- Rotate the dial until Rinse, Wash, and Stop light illuminate.
- Turn the washer off and unplug it for 10 seconds.
- Finally, turn on the washer and it should now be reset.
- Run a test load empty to be sure the reset worked. If not perform the reset procedure one more time.
Whirlpool Cabrio Washing Machine Replacement Parts WTW
If that did not work, try the next Cabrio reset procedure:
- Touch any button on the display pad to clear the error code or press “Pause Cancel.”
- Choose another cycle and press “Start”.
- Disconnect the Cabrio from power if the error or problem comes back.
- Wait 5 minutes before restoring power.
- Choose a new cycle and press “Start.”
- Run a test load empty to be sure the reset worked. If not perform the reset procedure one more time.
Cabrio Washing Machine Diagnostic Test & Error Codes
If the second reset does not get your washer out of the endless wash cycle, please leave a comment below and explain in detail what the exact issue is and we will assist in troubleshooting.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
It won’t do anything but stay in sensing mode. I reset it, did everything it said to do and it still won’t work. Any ideas this washer is only 14 months old and it won’t work now out of no where. It is a WTW5000DW. The sensing mode comes on locks it and it spins and senses then unlocks and just keeps doing this until I turn it off.
We moved into a new house and our cabrio won’t work. The display lights but nothing happens when you select a cycle. Can you help?
I have the same issue, have you solved the problem?
Getting an error code at the end of every wash cycle with a capital L and what looks like a lowercase F but flipped upside down.
I have tried the reset strategy several times only to see it again.
The washer is only 4 years old and I have not had any problems until last week.
The wash cycle will end and then begin again.
I now just go downstairs when I hear the washing cycle conclude so it doesn’t restart.
My washer is WTW5800BW0.
I thought I would check online before calling a technician.
I have a whirlpool cabrio WTW6200VW0, 20 minutes into any cycle it goes to error code Sd. We have tried all the troubleshooting suggestions and tore it down, cleaned it up and put it back together and it continues with the error code any suggestions?
I have a Whirlpool WTW5000DW0 type 589-01.
My machine will not go past the wash cycle.
The lid unlocks and when you open it the clothes are barely wet.
I have tried the reset process but it still will not run through the cycles.
I have to manually turn the knob to rinse and drain.
Any suggestions?
I have a Whirlpool Cabrio WTW8500DC0. I get no power, no error codes, no lights on the panel. Unable to do a reset using the unplug for 5 min, touch start then pause. I do notice when I go to it in, at the wall socket, I get a quick flash and pop. The circuit does not blow its breaker, I can plug any other appliance the same socket with no problem. Same thing on the other sockets in the room. I was able to take off the top panel to check for any burnt or things that looked abnormal. Nothing! I have been searching all over with no results.
My guess is that I have a shorted circuit somewhere.