I have a Whirlpool Cabrio washer about a year old. When I run a wash cycle it gets stuck in constant loop of wash cycles going on and on. The washer would begin to soak the clothes right after the spin cycle and then go through the entire wash cycle once again. To stop this I had to turn the washer off. Is there a reset I could follow to stop the endless wash cycle or do I need to replace parts?
Whirlpool Cabrio Washer Stuck In Wash Loop – How To Reset
Yes, there is a reset procedure to fix this. The Whirlpool Cabrio washers need to be reset in a different method than many other types and brands of washers. Here is how you can RESET your Cabrio washer (all Whirlpool Cabrio models). Follow the directions below and your washer should reset and begin to work normally. This reset procedure works on ALL Whirlpool Cabrio Washers that start with model number WTW.
How To Reset Whirlpool Cabrio Washer:
- Turn the washer off.
- Set the mode selector dial to NORMAL.
- Turn the dial counter clockwise ONE click (LEFT), clockwise THREE clicks (RIGHT), counter clockwise ONE click (LEFT) then clockwise ONE click (RIGHT).
- Now press the start button.
- All the cycle indicating lights should be illuminated.
- Press the Start Stop button once.
- Rotate the dial until Rinse, Wash, and Stop light illuminate.
- Turn the washer off and unplug it for 10 seconds.
- Finally, turn on the washer and it should now be reset.
- Run a test load empty to be sure the reset worked. If not perform the reset procedure one more time.
Whirlpool Cabrio Washing Machine Replacement Parts WTW
If that did not work, try the next Cabrio reset procedure:
- Touch any button on the display pad to clear the error code or press “Pause Cancel.”
- Choose another cycle and press “Start”.
- Disconnect the Cabrio from power if the error or problem comes back.
- Wait 5 minutes before restoring power.
- Choose a new cycle and press “Start.”
- Run a test load empty to be sure the reset worked. If not perform the reset procedure one more time.
Cabrio Washing Machine Diagnostic Test & Error Codes
If the second reset does not get your washer out of the endless wash cycle, please leave a comment below and explain in detail what the exact issue is and we will assist in troubleshooting.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
My washer will start in the sensing mode and then the lid lock light will start flashing and will not go through any cycles. I have a whirlpool cabrio. I tried resetting it and there is no error code.
model WTW7500WG2, cannot reset. When it’s plugging back in it always displays 1:06. Nothing is working.
After a power outage my washer keeps displaying Ld.
My whirlpool washer wtw5000dw1 and water keeps coming out as it is rinsing even after all cycles are done and even while off and unplugged. I had to turn the water off manually to stop water going into tub. Please help
I have a Whirlpool Cabrio washer which is giving me a code of f-71 SD despite there being no suds. I have run numerous clean water cycles. The washer agitates and drains but does not spin. In place of the spin I get a small backward and forward motion of the basket as if it was trying to spin. Model number wtw 6300 SG-1
I have a cabrio platinum model number WTW85008C0 and it just stop working when Its plugged in it just makes a loud beeping sound no numbers flashing nothing and I can’t do anything I only had this machine 2 years what could be wrong with it
When I place on normal it senses but never moves on and I see no error lights. I tried the resets above but no success.d