Free DIY appliance repair guides since 2013 Thousands of free guides · Tech replies within 72h
Water Cooler · Troubleshooting

Bottled Water Cooler Parts – Accessories For Bottled Water Dispensers

Need water cooler parts? If you have a bottled water cooler and need parts, we have the most common parts needed here. There are many different types of water coolers but most of them all work the same. Water coolers and dispensers all have the same basic parts and components. This page will show different parts that may be needed for your water cooler at home or at the office.

We also have a simple but easy to understand water cooler parts diagram to assist you in finding and understanding the name of the part you need. The parts we will show that are most broken, lost, or worn out is the threaded hot water dispenser, threaded cold water dispenser, o-rings, seals, water cooler bottle support collar, and more. See below for all water cooler parts for all brands of water dispensers.

Water Cooler Dispenser PartsBottled Water Cooler Dispenser Parts

Top Water Cooler Parts:
1. Threaded cold water faucet dispenser
2. Threaded hot water faucet dispenser
3. O-ring or seal for threaded water cooler COLD water dispenser
4. O-ring or seal for threaded water cooler HOT water dispenser
5. Water cooler bottle support collar

Bottled Water Cooler Parts Diagram - Parts IdentificationBottled Water Cooler Parts Diagram – Parts Identification

 

Water Cooler Electrical Schematic - For General ReferenceWater Cooler Electrical Schematic – For General Reference

 

Bottled Water Cooler Dispenser PartsBottled Water Cooler Dispenser Parts

 

WATER COOLER PARTS - ALL BRANDSWATER COOLER PARTS – ALL BRANDS

Water Cooler Parts are available for all brands of water coolers including Avalon, Whirlpool, Primo, Igloo, Hamilton Beach, Oasis, Honeywell, Primo Water, NewAir, Avanti, Aquverse, NutriChef, Vitapur, Kissla, Glacier Bay, Farberware, and Giantex.

For further research for parts and part names, here are resources for service and cleaning manuals… Water Dispenser Service Manuals

Having noise issues with your water cooler? – Hot And Cold Water Cooler Dispenser Makes Noises

If you need help finding a special part or any part for your water cooler or water dispenser, please leave your question below with the make and model number of your water cooler.

Keith Schneerer

Written by Keith Schneerer

Certified Appliance Tech · Founder, RemoveAndReplace.com

Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.

More about Keith →

71 thoughts on “Bottled Water Cooler Parts – Accessories For Bottled Water Dispensers”

  1. I have a Primo top water dispenser with side dispenser for animal (ref 860013-C).
    The water cooler probe receptacle is broken (very badly made since every time you load a bottle, it push hard on it…) so I guess I need to change the whole support collar since I don’t see how to only change the probe.
    What would be part number for that and where to get it? How much would it cost? I live in Canada so would it work to receive it there?

  2. Bonnie Reynolds

    We have a glacier bay water dispenser for hot and cold. Model VWD1066BLS-1-HDU. The drain is missing the valve to shut off. Please advise where to purchase a new drain valve. Thank you

  3. Looking for a water dispenser support collar (including probe) for a Polar water cooler(PWD5445BLS) or compatible…
    Thanks

  4. I wouldn’t recommend tackling the heating element on a Water Boy NRR-H as a DIY repair. In my experience, you can spend big bucks just to find out that some other piece (e.g., thermostat, safety limiter) has failed.

  5. I have a primo water cooler model#594651 I need the whole drip tray. I also have a primo water cooler model#601130 I need the whole drip tray and the water bottle support collar. Where can I get these?

  6. I have a glacier bay vwd2266w-2 my hot water works fine but the cold water light doesn’t come on and the water doesn’t cool off
    I did reset and I hear a click noise in the back once in a while but water still not cooling
    Didn’t get any help from glacier as is out of warranty

  7. I Have a Bottom load GLACIER BAY water dispenser, model 1000 050 439.
    A couple of days ago after loading a fresh 5 gal. water bottle, you have to pierce the plastic cap with the extraction tube, while inserting said tube with force into the top of the bottle, the bottom third of the tube broke (it is a metal tube), and it cannot be repaired. So I am trying to find a replacement. I live in Queens NYC.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.