Hisense washers have digital displays that show information such as wash time and mode, error codes if it encounters a fault or problem. When an Error Code appears on the screen how do you know what this identifies? Here’s our list for all Hisense Washing Machine Error Codes along with some troubleshooting methods.
If you do not find the error or fault code your Hisense washer is displaying, let us know the model number of your washer and the error code it shows. Leave your question below and we will assist you in repairing and or clearing the error code from your Hisense Washing Machine.
Hisense Washing Machine Error Codes
Below are error codes that occur with Hisense washers.
If you need a Hisense washing machine Owners or Service Manual, please check here to see a PDF file… HWFE7510 Manual, and the HWFR6510 Manual.
HiSense Washing Machine Error Codes – Digital display (if on your model washer)
HiSense Washer Error Code F01 or F02 Definition = Water Supply Fault
CHECK WATER SUPPLY TO WASHER
HiSense Washer Error Code F03 Definition = Draining Fault
CHECK THAT DRAIN HOSE AND PUMP IS NOT BLOCKED
HiSense Washer Error Code F04 or F05 or F06 or F07 Definition = Electrical Module Issue/Board/Wiring
CHECK ALL WIRING IN WASHER – CONNECT LOOSE WIRES OR HARNESSES
HiSense Washer Error Code F13 Definition = Door Lock Fault
CHECK THAT WASHER DOOR IS CLOSED – CHECK THAT DOOR SWITCH IS WORKING PROPERLY
HiSense Washer Error Code F22 Definition = NA
UNPLUG WASHER TO RESET
HiSense Washer Error Code F24 Definition = Water Level Reaches Overflow Level
CHECK SENSOR AND OR WATER INLET VALVE FOR FAULTS
HiSense Washer Error Code UNB Definition = Unbalance In Washer
CHECK THAT CLOTHING CONTENTS IN WASHER ARE NOT IMBALANCED
ERROR CODE CHARTS AND DESCRIPTIONS
Hisense Washer Troubleshooting Guide
Hisense Washer How To Remove Filter/Drain 1
Hisense Washer How To Remove Filter/Drain 2
Hisense Washer Draining Precaution & Information
NOTE: For models with a remaining time that displays, a failure code between F01 to F07 and F13 or UNB appears on the display.
Hisense washer failure error code F01 and F02 appears on the digital display:
Press the start/pause button to cancel the failure code and start the program
Hisense washer failure error code F03 appears on the digital display:
Switch the washer off and Check if drain pump is blocked or drain hose is kinked
Hisense washer failure error code F04 to F07 appears on the digital display:
Switch the washer off and select the desired program
Hisense washer failure error code F13 appears on the digital display:
-Check whether the door is closed or not and press the start/pause button
-Start program for 20 sec and unlock the washer door
-(PTC) to check whether the door is closed
-Open or close it again
-After fault is removed, press “Start/Pause” key. If fault occurs again remove power
-Door Lock faulty
Hisense washer failure error code “F24” Water level reaches overflow level:
-Press “Start/Pause” key and feed water
-Select and start required program. If fault occurs again, remove power
If a failure code “UNB” (UNBALANCED) appears on the display:
-Switch the washer off and rearrange the clothes
-Select the spin programme and start; if the fault persists, unplug the washer
Haier washer care and maintenance
Door Seal – Filter – Detergent Dispenser
Water hose & mesh on washing machine
Check for cracks in hose and clogs in mesh filters
Need help? Please leave your model number and error code below and we will answer back to assist you in clearing any error codes you may get.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
I’m having the same issue, what did you end up doing if you don’t mind sharing
Hello, my washing machine ( Hisense wtoq132s) has started to make really loud cracking noises when it spins and shakes rigorously too, it’s less than a month old and hasn’t done that before. What could be the problem and what do i do???
F17 whilst drying, I took off the top, and there were two black rubber pipes coming from the washing powder drawer, one of the pipes had s kink in it so wasnt flowing correctly, I moved the piped so it opened properly and cable tied it so it wasnt bent. I’ve had no error codes since . Hope this helps. No f17 in the manual that came with the machine which I found odd.
The Hisense WFHV8012S washing machine we got keep showing error F-06 code. This is even the second time we are changing machines and it still appeared on the new machine after just a minute of working
My HiSense washer hwfl1014v about 6 months old, came up with a control board error that went away now I have the f21 error code?
Sue Jones,
Hisense Washer fault code – error code UNB:
To try and reset this fault, press the Power Supply key for 3 sec and this will turn the washer OFF.
Next, open the washer door and move around the clothes, then rotate knob to Single Dehydration Mode.
Spin the clothing to dry them again.
If the error shows again then disconnect the power supply for 5 minutes to reset.
-RR
I’ve had my Hisense washing machine for just over 4 months and I’ve always had problems with Unb faults.
I thought it was me putting too much washing in and therefore overloading the machine.
2 weeks ago the machine started making a horrendous noise so I arranged for an engineer to call.
He fixed the noise problem and I also mentioned about the amount of Unb errors and he said to make sure that the machine is loaded to capacity.
This morning I have washed a light size duvet cover and a bath towel on the economy cotton wash (max 9kg) and the machine showed a Unb error.
I have now tried the spin cycle a further 5 times with load as it is and also taking one of the items out and it still won’t spin, each spin cycle also takes 28 minutes rather than than the 12 specified.
We are a family of 4 working adults and washing is now causing me real issues, this is the only wash I have done so far today it’s costing me lots of time. How can I get over this issue please?