Dishwasher Has Beeping Sounds Blinking Lights – How To Reset

Many modern dishwashers have electronic controls that notify you when there is a problem. Your dishwasher may have blinking lights or beeping sounds. At times your dishwasher may need to be reset. No matter what brand of dishwasher you have, it may at times, audibly beep noises and blink the lights. This is to tell you that your dishwasher needs a reset or may mean a part needs replaced or checked.

Dishwasher blinks or beeps – how to fix

With most dishwashers different sounds and blinking lights will mean different problems. Depending on what brand dishwasher you have, the issue may need to be researched. If you have your dishwasher manual it is best to refer to it first. Your dishwasher manual will explain what the different blinking and flashing lights mean. It will also tell you what the beeping noises may signify.

The flashing lights and the beeping sounds for most dishwashers mean:

Blinking or Flashing of the Start and or Reset light or button:
This may mean the dishwasher is in the “turning off mode”. Depending on the type of model dishwasher you have… The light may flash from 60 to 90 seconds. If this happens, simply wait up to 120 seconds and see if the dishwasher resets and resumes to normal. Once the dishwasher stops flashing or blinking, try and start a wash cycle to see if it will wash with no problems.

Dishwasher beeps every 30 seconds:
This will indicate that the dishwasher door was opened during a wash cycle. If the door is unlatched or opened during any wash or rinse cycle, the dishwasher will sound a beeping sound every 30 seconds. To remedy this issue, simply close the dishwasher door and let the dishwasher resume its wash cycle.

If the above blinking lights and beeping sounds do not apply to your dishwasher:
Flashing lights and or beep sounds can mean the dishwasher problem was from a power surge or power outage. You can unplug the dishwasher from power or shut off the breaker to the dishwasher for 1 minute. This may reset the dishwasher and get it back to working order. If the reset does not work after removing power from the dishwasher, then the next thing to try is to press the Start or Reset button to reset the dishwasher. Press for about 10 seconds. Then wait about 2 to 3 minutes and see if that did not reset the dishwasher.

If this did not fix your dishwasher… here are more informative dishwasher error code pages for Bosch, Haier, Hotpoint, Kenmore, KitchenAid, LG, Samsung, and more.

How to turn off MOST GE dishwasher beeps

Fix Indesit IDL40 Dishwasher Flashing Lights 1 and 3

Dishwasher Lights Flashing? –Whirlpool Dishwasher Repair

Kenmore Elite Dishwasher blinking light Control Board FIX

Hotpoint Indesit dishwasher flashing lights fault error codes a 10

Whirlpool & Maytag Dishwasher – Clean Light Blinking

Fixing a Whirlpool – Kitchenaid Dishwasher with a Blinking Clean Light

Here are other pages that may fix your dishwasher concerning a dishwasher that will not drain, dishwasher is not dispensing rinse aid, a dishwasher has low water level, dishwasher leaves food particles on dishes, dishwasher does not dissolve tablet, dishwasher does not dry dishes, water in bottom of dishwasher, dishwasher will not turn on, dishwasher will not fill with water, and many more.

If you need assistance with your dishwasher concerning blinking flashing lights, beeping sounds, or any other type of issue, please leave a comment below and we will be happy to assist you.

Written by Keith Schneerer

Certified Appliance Tech · Founder, RemoveAndReplace.com

Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.

More about Keith →