What does 5E mean on Samsung Washer? Is your Samsung washing machine showing the error code 5E or SE? If your Samsung washer is in the middle of a drain cycle and the 5E error code shows on your washers display, it means that the water is not properly draining out of the washer. Something may be clogged, jammed, or blocked and thus preventing water from draining out of the washer. The 5E error code can be confused with SE, as the digital display on your Samsung washer may look like an S or a 5…. The official error code is 5E. Here is what to do when you get the 5E or se error code on your Samsung washer…
What does the 5E Error Message Mean On My Samsung Washer?
The Samsung washing machine will display the 5E error code if the water is not draining out in the allotted time. To alert you of this, the Samsung washer will make a buzzing sound if the water does not drain out of the washer within 15 minutes. At this time the timing indicator will display the “5E” error code.
Here is what YOU can do to fix the 5E error code issue and get the washer working again:
Step 1 – Clean out the drain filter at the bottom of your Samsung washer.
(If the debris/drain filter is clogged, the water cannot drain and the 5E error will display)
Clean the debris filter if your Samsung washer is NOT DRAINING
Step 2 – Be sure the drain hose located on the back of the washing machine is not bent, kinked, or clogged.
(Remove the drain hose from the back of the washer and run water through it to be sure it is not blocked or clogged)
Samsung Washer Drain Hose May Be Clogged – Check Washer Drain Hose For Blockage
Step 3 – Be sure the washer drain hose is installed so the end of it is not too far down the standpipe.
(If the washer drain hose is inserted into the standpipe in the wall too far or not far enough, the washer may not drain properly, be sure the drain hose is positioned correctly)
Washer Drain Hose – Be Sure It Is Positioned Correctly In Standpipe
Step 4 – Check the drain pump that is located inside the washer to be sure it is not blocked and that it is receiving power.
(If the drain pump that pumps out the water in your Samsung washer is clogged and cannot pump, it may need to be cleaned out or replaced. If the Samsung washer drain pump is not working electrically, it will need to be repaired or replaced)
Samsung Washing Machine Drain Pump – May Be Clogged Or Faulty
Here is a video for how to get to the drain pump in a Samsung washer and also how to remove and replace a washer drain pump if needed…
Washer Not Draining? Samsung Washer Drain Pump Replacement
This video provides step-by-step instructions for replacing the drain pump on a Samsung washing machine.
Common reasons for replacing the drain pump is if the washer is not draining and unclogging the pump and hoses does not fix the problem.
Samsung Washing Machine Replacement Parts
This 5E error code applies to Samsung washing machines with the model numbers: WA85BWPEH/XTL, WA90BWQEH/XTL, WA95BWBEH/XTL, WA90BWMEH/XTL, and WA95BWPEH/XTL.
If you need further assistance with your Samsung washer and the 5E error code, please leave a message below and we will be happy to assist you.
Please Share The Love
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 28 years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Hello! I have a 5e error code on my Samsung washer. Have cleaned the filter, replaced the drain pump, but the code still shows up. The pipes too appeared all clean. So not sure what to try at this point, before replacing the unit. Any feedback is greatly appreciated.
I have similar issue. 5e code but water is drained. is it the water level sensor?
I’m getting the 5E code when I did anything other than a small load. I have replaced the drain hose as it had some holes and I’m draining into a sink. Typically if we turn it off and put it in rinse soon mode it will finish without problems. We have also had the sud code come up. The filter is clean. Is it possible that the hose that goes to the pump needs replaced or cleaned out?
I have SE error , ive cleaned filter, check the hose its getting water flow out it when I put wet vacuum over drain hose however it still error messages in spin /drain cycle. Does that mean pump is bad?
Hi Guys,
Plz help me
My samsung machine is giving 5E error even after changing the pump in it and clearing the debris filter. What can be the problem. It never happens in every wash. Sometimes with small time wash , error don’t comes.
Plz suggest what can I do
Hi Guys, this is helpful.
I got the 5e/se code and the debris filter was clogged. I pulled it out and the water rushed out.
I cleaned the filter and put it back. But now when i plug the machine in, it gives an LE1/LEI code.
Might this be a low water level because i drained the machine? Or should i always call in help?
These instructions worked perfectly! But before pulling the pump I shone a flashlight into the drain hose leading from the drum, and found a fabric furniture coaster, the exact same size as the small end of the hose that connects to the pump. Disassemble to reassemble in about 45 mins. Thank you, thank you, thank you.