Samsung Range ERROR CODES For Electric Models





Samsung range/oven displaying an error code? Error codes may appear on your Samsung range display panel to identify a fault. This following complete list of Samsung oven range error codes will assist you in finding the problem. Use the codes below to clear or repair your electric Samsung range. Once you know the cause of the error code that is displayed, you will understand which part of the range is faulty and causing the error. You can then purchase the part and fix the oven yourself. If you still cannot find a solution to the issue, use the Samsung Home Appliance Support page.

Samsung Range Error Codes For Electric ModelsSamsung Range Error Codes For Electric Models

Samsung Range Error Code = C-d0
Error Code Definition = Stuck Key

  1. How To Clear Error Code:
  2. A key on the membrane switch panel is stuck
  3. Try to free the stuck key
  4. Press down directly on top of all keys on the membrane switch panel
  5. If that doesn’t free the stuck key then press down slightly off center on all keys
  6. If the key cannot be free then replace the membrane switch panel

Parts Needed To Repair = Membrane Switch Panel







 

Samsung Range Error Code = E-08
Error Code Definition = Oven Is Not Heating

  1. How To Clear Error Code:
  2. Remove Power To The Range
  3. Check the bake and broil heating elements for damage or burns
  4. If an oven element is damaged then replace it
  5. Disconnect the oven temperature sensor and check the resistance of the oven temperature sensor using a meter
  6. The oven temperature sensor should measure around 1080 ohms at room temperature
  7. If the resistance is off by more than 200 ohms then replace the oven temperature sensor
  8. Also check the wiring between the oven electronic control board and the oven elements for damage and replace any damaged wiring harnesses

Parts Needed To Repair = Bake Element – Broil Element – Oven Temperature Sensor – Wiring Harness

 

Samsung Range Error Code = E27
Error Code Definition = The Oven Temperature Sensor Is Faulty

  1. How To Clear Error Code:
  2. Remove Power To The Range disconnect the oven temperature sensor and check the resistance of the oven temperature sensor using a meter
  3. The oven temperature sensor should measure around 1080 ohms at room temperature
  4. If the resistance is more than 2950 ohms then replace the oven temperature sensor

Parts Needed To Repair = Oven Temperature Sensor

 







Samsung Range Error Code = E28
Error Code Definition = Oven temperature sensor is defective

  1. How To Clear Error Code:
  2. Remove Power To The Range
  3. Disconnect the oven temperature sensor and check the resistance of the oven temperature sensor using a meter
  4. The oven temperature sensor should measure around 1080 ohms at room temperature
  5. If the resistance is less than 930 ohms then replace the oven temperature sensor

Parts Needed To Repair = Oven Temperature Sensor

 

Samsung Range PartsAppliances : Parts & Accessories
Range Parts & Accessories : Samsung Range Parts

 

Samsung Range Error Code = E-OA
Error Code Definition = Oven Is Overheating Error

  1. How To Clear Error Code:
  2. Remove Power To The Range
  3. Disconnect the oven temperature sensor and check the resistance of the oven temperature sensor using a meter
  4. The oven temperature sensor should measure around 1080 ohms at room temperature
  5. If the resistance is off by more than 200 ohms then replace the oven temperature sensor
  6. Check the oven electronic control board for burns or melted wires
  7. If the electronic control board is damaged then replace it

Parts Needed To Repair = Oven Temperature Sensor – Oven Electronic Control Board







 

How to Replace a Range Oven Control Board
This DIY repair guide explains how to replace the oven control board in a range
The oven control board controls the bake and broil elements, and houses the digital display

 

Samsung Range Error Code = SE
Error Code Definition = Defective key on the control panel

  1. How To Clear Error Code:
  2. Remove Power To The Range
  3. Open the control console and make sure that the wire harness is plugged into the oven electronic control board properly
  4. Check the wire harness for damage
  5. If the wire harness is good then replace the control panel
  6. If the problem comes back replace the electronic control board

Parts Needed To Repair = Control Panel – Oven Electronic Control Board

 

Samsung Range Error Code = E-OE or FL
Error Code Definition = Oven Door Lock Error

  1. How To Clear Error Code:
  2. Remove Power To The Range
  3. Make sure the wiring harness connections on the oven door lock assembly are stight
  4. Check the oven door lock assembly for damage
  5. Replace the oven door lock assembly if damaged

Parts Needed To Repair = Oven Door Lock Assembly – Wiring Harness







 

Samsung Range Error Code = LE
Error Code Definition = Low DC Voltage Fault Under 9 Volts DC

  1. How To Clear Error Code:
  2. Remove Power To The Range and reconnect any loose wires between the low voltage transformer and the electronic control board
  3. Replace the wire harness if damaged
  4. If the wiring is good then replace the transformer
  5. If the problem comes back then replace the electronic control board

Parts Needed To Repair = Low Voltage Transformer – Electronic Control Board – Wiring Harness

 

Samsung Range Error Code = E-54
Error Code Definition = Oven Electronic Control Board Communication Fault

  1. How To Clear Error Code:
  2. Remove Power To The Range and secure any loose wiring connections between the oven electronic control board and the main cooktop control board
  3. Replace the wire harness if damaged
  4. If the wire harness is ogood then replace the oven electronic control board
  5. If the problem comes back then replace the main cooktop control board

Parts Needed To Repair = Oven Electronic Control Board – Main Cooktop Control Board – Wiring Harness

 







Samsung Range Error Code = E-55
Error Code Definition = Oven Electronic Control Board Communication Error With Touch Panel Display

  1. How To Clear Error Code:
  2. Remove Power To The Range and secure any loose wiring connections between the oven electronic control board and the control panel
  3. If the connections are secure then replace the control panel and wire harness assembly
  4. If the problem pcomes back then replace the oven electronic control board

Parts Needed To Repair = Control Panel – Oven Electronic Control Board

 

Samsung Range Error Code = E-56
Error Code Definition = Cooktop Has Error

  1. How To Clear Error Code:
  2. Check the cooktop display for error codes
  3. Once the cooktop is repaired the code will clear itself

Parts Needed To Repair = Cooktop Components

 

Samsung Range Error Code = cE56
Error Code Definition = Internal Oven Electronic Control Board Fault







  1. How To Clear Error Code:
  2. Remove Power To The Range for 3 minutes to reset the oven electronic control board
  3. If the code appears after you plug the range in then remove power to the range and secure any loose wiring connections
  4. Replace any damaged wire harnesses
  5. If the problem comes back then replace the oven electronic control board

Parts Needed To Repair = Oven Electronic Control Board – Wire Harnesses

 

Samsung Range Error Code = to
Error Code Definition = Cooktop Top Temperature Sensor Error

  1. How To Clear Error Code:
  2. Remove Power To The Range and make sure the wire connections between the top temperature sensor and the main cooktop control board are secure
  3. Replace the sensor if the wire harness is damaged
  4. If the wire harness connection is good then replace the top temperature sensor
  5. If the problem comes back then replace the main cooktop control board

Parts Needed To Repair = Cooktop Top Temperature Sensor – Main Cooktop Control Board

 

Samsung Range Error Code = ts
Error Code Definition = Cooktop Top Temperature Sensor Fault

  1. How To Clear Error Code:
  2. Remove Power To The Range and make sure the wire connections between the top temperature sensor and the main cooktop control board are secure
  3. Replace the sensor if the wire harness is damaged
  4. If the wire harness connection is good then replace the top temperature sensor
  5. If the problem comes back then replace the main cooktop control board

Parts Needed To Repair = Cooktop Top Temperature Sensor – Main Cooktop Control Board







 

Samsung Range Error Code = bo or bs
Error Code Definition = Cooktop Element Inverter Control Board Fault

  1. How To Clear Error Code:
  2. Inverter control board sensor is defective
  3. The sensors monitor the inverter control boards that convert AC voltage to DC voltage for induction element heating
  4. Remove Power To The Range and secure the wire harness connection for the inverter control board sensor
  5. Replace the sensor if the wire harness is damaged
  6. If the wire harness is good then replace the sensor
  7. If the problem comes back then replace the inverter control board for the element

Parts Needed To Repair = Inverter Control Board – Inverter Control Board Sensor

 

Samsung Range Error Code = ot
Error Code Definition = Cooktop Over Temperature Fault

  1. How To Clear Error Code:
  2. Let the cooktop cool and then Remove Power To The Range to reset the electronic control boards
  3. If the cooktop continues to overheat then replace the main cooktop control board

Parts Needed To Repair = Main Cooktop Control Board

 







Samsung Range Error Code = 0
Error Code Definition = Pan Detection Issue

  1. How To Clear Error Code:
  2. Pan or cookware wrong size

Parts Needed To Repair = New Cookware Induction Cooktops

How To Display Previous Samsung Range Error Codes

How to Display Error Codes (If shown before but now gone but problem persists)
Powering off the Samsung range clears the error codes from the display.
Follow the procedure to display the error codes again:

1) Restore power to the Samsung Range.
2) Press the Clock AM/PM button 2 times and then press AM.
3) Press 1, 2, 3, 4 on the keypad.
4) Press SET/START.
5) Press and hold CUSTOM COOK and 0 (zero) at the same time for 2 or 3 seconds. (The most recent error code will be displayed)
6) Press 0 “zero” so you can scroll through the previous 4 error codes or press CLEAR/OFF to leave the error code display mode.

Looking for Parts for your Samsung Range/Stove/Oven? RepairClinic.com has the appliance parts you need!


More "Do It Yourself" Tips, Tricks, Ideas, Repair:


















{ 0 comments… add one now }

Leave a Comment

Previous post:

Next post: