Haier Dishwasher Error Fault Codes – Lights Flashing Beeping Sounds







My Haier dishwasher has been making a beeping sound and the lights are flashing. It shows an error code at times. The dishwasher is beeping and the lights are flashing…

We will show you below what the error code on your Haier dishwasher means and how to troubleshoot and fix it yourself.

Haier dishwasher error codesHaier dishwasher error codes – flashing lights – beeping











Haier dishwashers will have flashing lights and make a beeping noise. Some other model dishwashers will display an error code. This will help you to identify what the issue is. See below for information about your Haier dishwasher problem and the solutions to fix it. Here are some other ways to fix and repair Haier dishwasher issues yourself.

HAIER DISHWASHER FRONT PANELHAIER DISHWASHER FRONT PANEL

Haier dishwasher front panel 1Detailed view of a Haier dishwasher front panel

HAIER DISHWASHER ERROR CODEHAIER DISHWASHER ERROR CODE E1HAIER DISHWASHER ERROR CODE E2HAIER DISHWASHER ERROR CODE E3HAIER DISHWASHER ERROR CODE E4HAIER DISHWASHER ERROR CODE E5HAIER DISHWASHER ERROR CODE E6HAIER DISHWASHER ERROR CODE E7HAIER DISHWASHER ERROR CODE E8HAIER DISHWASHER ERROR CODE E9HAIER DISHWASHER ERROR CODE EAHAIER DISHWASHER ERROR CODE EBHAIER DISHWASHER ERROR CODE ECHAIER DISHWASHER ERROR CODE ED

Haier washing machine replacement partsHaier washing machine replacement parts

Haier Dishwasher Error Code Explanations:
Error Code E1
The door is NOT closed properly.
Please open the door.

Error Code E2
The temperature of inlet water is out of range.
Please check whether inlet water is hot.
If so, please change to cold water inlet.











Error Code E3
The water in the dishwasher is not to the correct level.
Please check if the drain hose is lower than 40CM, and water
has drained out of the dishwasher during operation.
Adjust height of drain hose.

Error Code E4
Open the dishwasher door and remove the filters and check the filters in the bottom of the dishwasher are clear of debris.
Check the drain hose is not bent, creased, squashed or folded.

Error Code E5
Low or no water pressure. Check the water supply is turned on and has sufficient pressure.
The water supply hose is crimped or bent or water inlet pipe filter is blocked or clogged, or turned off.

Error Code E6
Locate the water supply valve, and shut off the supply,
which will prevent any more water from flowing to the dishwasher.

The dishwasher is beeping and the lights are flashing or show an error code.
See the error code chart above…

COMMON HAIER DISHWASHER QUESTIONS AND SOLUTIONS BELOW:











Haier Dishwasher Question
Glasses or dishes become cloudy
Higher temperatures promote glass corrosion.
For glass, choose the program with the lowest temperature possible.

Haier Dishwasher Question
Water marks on dishes
Increase the amount of rinse aid used.

Haier Dishwasher Question
Detergent is not fully go away after washing
Detergent is caking – Use new detergent – Use hotter temp.
Please only add detergent just before starting the program.

Haier Dishwasher Question
Strange noises from dishwasher
Spray arm is hitting items in the basket.
Load the dishes properly or change the height of the upper basket.

Haier Dishwasher Question
The dishwasher does not wash
Tap is turned off. Turn the tap on. Tap is jammed. Check the tap.
Supply hose is kinked. Route the hose without any kinks.

Haier Dishwasher Question
The Dishwasher will not run when switched on
Check the socket in your house. The circuit breaker tripped.
Switch the circuit breaker in your house and reset.

Haier Dishwasher Question
Where is the model and serial number on my dishwasher?
Open the door slightly and it is on the top left hand side of the door.

Haier Dishwasher Question
How to deal with when the tap pressure is too high?
If the water pressure is too high, turn down water tap or add reducing valve to reduce it.

Haier Dishwasher Question
Dishwasher keep filling water and draining at the same time
Please keep the drain hose end high between 40~100cm.
Don’t put the drain hose end into water to avoid siphoning.

Haier Dishwasher Question
Lid on detergent dispenser can not be closed
Detergent dispenser is overloaded. Remove some detergent,
Then slide the lid closed and engage by pressing down.

Haier Dishwasher Question
Bad smells or odors from dishwasher
Make more frequent use of programs with higher temperatures.
Regularly use a machine cleaner for intensive cleaning.

Haier Dishwasher Question
Heavy foam buildup
Use only tablets or powders specifically made for use in dishwashers.

Haier Dishwasher Question
No water enters the machine
Supply hose is kinked. Route the hose without any kinks.
Water valve may be off.

Haier Dishwasher Question
The dishwasher is not draining
The drain hose is blocked or folded. The height of drain hose end is more than 100 cm.
The drain hose end is inserted into the water. The inner fitter screen is blocked by food residue.

If you have any questions about error codes, beeping, or flashing buttons on your Haier dishwasher, please leave a comment below and we will be happy to assist.



More "Do It Yourself" Tips, Tricks, Ideas, Repair:















{ 3 comments… read them below or add one }

1 victory February 25, 2017 at 6:01 pm

I will give some tips to your washing machine to properly run.
Now you need to change the capacitor of the washing machine.
Since your problem is accrued in the capacitor remove the capacitor and see the value of that capacitor.
For example it looks 10 + 5 mf.
Then purchase same value of the capacitor and fix it properly then your problem is solved.

Reply

2 Carolyn Munro July 12, 2016 at 9:46 am

My Haier dishwasher high temp wash light comes on then it goes off. The dishwasher is empty, no cycle working. I do not know where model number.

Reply

DIY Project Help Tips 3 DIY Project Help Tips July 12, 2016 at 5:14 pm

Carolyn Munro,
Please try and find the Haier dishwasher model number.
This dishwasher model number finder page will assist you.
Get back to us………
-RR

Reply

Leave a Comment

{ 1 trackback }

Previous post:

Next post: