Washer not rinsing? Have you recently removed a load of clothing from your washer and found that they are not rinsed properly? You may notice a residue of your laundry detergent still in your clothing or the clothes may be extra wet. Clothing that has not been rinsed properly is a sign there is an issue with your washing machine. We will help you to identify what may be causing the washer rinse problem. This will help you to find a solution as to why the washer does not rinse therefore fixing it yourself and saving money.
Washing machine not rinsing properly
Parts or problems on your washer that may cause it to not rinse properly:
1. Too much Detergent added
2. Overfilled Washer
3. Drain Pump not working or clogged
4. Drain Hose may be bent or clogged
5. Water Supply Hoses bent or kinked
6. Water Supply Valves not fully open
7. Switch or Control Board malfunction
The 7 items listed are the MOST COMMON reasons for a washer that will not rinse. Your washer may not be rinsing the soap out, the rinse cycle does not work at all, the rinse cycle does not fill with water, or the water fills slow during rinse. Below we will go into detail as to what you should check to get your washing machine to rinse properly again.
1. Excess Detergent:
Using too much of your detergent (HE or powdered) can cause your clothing to have soap residue left in it. You may have used a type of detergent that is not recommended for your washer. Do not use too much detergent and do not add the wrong type.
2. Excess Clothing in Washer:
Overloading the washing machine with clothing can cause an improper rinse. Adding just one large blanket may make your washer not able to fully rinse. Reduce the size of your wash load.
3. Drain Pump Bad or Clogged:
If you have a bad drain pump or a clogged pump this will affect the rinsing of your clothing. The pump in your washer may not be able to fully get all the water out as there may be something jammed in the pump. This will cause a restriction and the water will not flow out therefore not rinse properly. Remove the drain pump to see if something is stuck in it.
4. Drain Hose Clogged:
The drain hose is attached to the drain pump and goes to the wall to drain out. A bend in the drain hose will cause improper rinsing leaving soap and detergent residue. A drain hose blockage can cause dirty rinse water to back up and come back into the drum. Make sure the hose is not bent and free of debris.
5. Water Supply Hoses Bent:
Be sure that the hoses that supply water to your washer are not bent or crimped. Sometimes when the washer is pushed back into place the hoses get bent and cannot let the proper amount of water into your washer. Check to be sure the water supply hoses are not being restricted.
6. Water Supply Valves Not Fully Open:
There should be 2 water valves on the wall behind your washer. If one or both (Hot and cold) water valves are not fully in the open position, this can cause a rinse issue. Be sure that both the water supply valves are FULLY open.
7. Switch or Control Board Malfunction:
Your washer uses a switch or a control board to change wash functions. A malfunctioning switch or control board can make your washer not rinse at all. A bad switch or control board can also stop your washer right before the rinse cycle begins. Check the function switch with a meter to see if it is causing the issue. The control board can be looked at to see if there are loose wire harnesses or any burn marks.
Here are other problems you may have with your washing machine and pages to assist you to repair your washer yourself (DIY):
If your washer is not spinning, washer is not draining, washer is not turning on, washer is getting error codes, washer fills and drains at same time, washer is not filling with water, washer fills slowly, washer is overflowing, washer is leaking, or your washer is not agitating or washing, these pages will assist you to find the solutions and fix your washer.
If you have questions about your washer not rinsing properly, please leave a comment below and we will assist you to troubleshoot your washer.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Washer fills with water does not agitate then drains. Already replaced the control panel. Why is it still not working?
I have an old fridgedaire washer (1990s). The rinse cycle only drops water. Both valves are open and there doesn’t appear to be crimping in the hoses. It is so old, is there an actual motherboard? I’m wondering how else to trouble-shoot because it takes 2 hours for 1 load.
2 year old G E washer. GTWN4250D2WS Washes fine When rinse cycle starts runs about 20 secs. Then quits running water and starts draining. I replaced control board. didn’t fix problem. Washer worked fine for about 2 years.Also replaced water diffuser. that didn’t fix problem.
I have a front loader whirlpool washer. It goes through all the cycle, but it still leaves soap in the washer. I’ve got to wash close 3 time’s just to get the soap out. New pump, hose. I’m so sick of this, PLEASE HELP ME!!!!!
Dear Sirs,
My automatic washing machine always stops at rinse cylce and usually at spin cycle.
My washing machine is Wansa Gold series number: WGFL5085-WHT-C.6
When it stops at rinse cycle, I put the machine at rinse cycle again and starts it again and it goes on. Then it stops at spin cycle. I put it at spin cycle and restarts it again and it goes on.
What is the problem?
anil kumar,
If your washer doesn’t go through the washer rinse cycle, the most likely cause is the water valve. What happens is the water valve will stop letting cold water into the washer; therefore, once the washer gets to rinse it will either stop or not do anything during the whole rinse cycle. Do you have the model number of your Godrej fully automatic Washing machine?
-RR
Rinse is not working on my Godrej fully automatic Washing machine.