6 Ways To Fix Whirlpool Dishwasher That Will Not Drain

(Last Updated On: September 16, 2022)

How to fix a Whirlpool dishwasher that won’t drain. Your dishwasher isn’t draining or is taking too long to drain? The Whirlpool dishwasher may have a number of issues that might cause the draining issue. Check the following items in order to troubleshoot and fix the issue.

Whirlpool Dishwasher Will Not DrainWhirlpool Dishwasher Will Not Drain

1. Is dishwasher wash cycle incomplete?

Check to ensure that the last wash cycle was successful. If the dishwasher has a CLEAN light it should be illuminated to tell you the cycle is complete. If the CLEAN light does not come on, then the dishwasher may have been disrupted before it was able to finish. To remedy this issue simply shut the dishwasher door and depress the START button to finish the wash cycle.

What should I do if my dishwasher won’t drain? If the filter is clogged, your dishwasher will not drain.

2. Is the dishwasher filter clean?

The most frequent cause of a plugged dishwasher drain is the filter. Miscellaneous items can get stuck in the filter and stop water from draining out of your dishwasher. Look in the bottom of the dishwasher to find the filter assembly. Remove the filter and clean it out. Look in the dishwasher where the filter assembly came out of and clean this area too.

See also  How To Fix Dishwasher That Is Not Filling With Water

Whirlpool filter dishwasherWhirlpool Filter Location Dishwasher

3. Why does dishwasher have water at the bottom?

If the dishwasher is not draining properly this usually means a clog. There may be standing water that has built up in the bottom of the tub thus indicating a clog. To unclog a dishwasher and get it draining water again, try running the garbage disposal which shares the drain with the dishwasher. If the disposal is full of food particles it can stop the dishwasher from draining properly. If you recently replaced the garbage disposal, check the disposal for a knock out plug that needs to be removed so the dishwasher can drain.

4. Is the dishwasher drain hose bent?

Examine the drain hose that connects your dishwasher to the drain pipe below the sink. Make sure there are no restriction or kinks in the hose. There can be food particles or other items stuck in the hose. If you find the drain hose fraying or damaged in any way, remove and replace it.

See also  Amana Dishwasher Lights Blinking - How To Reset - Troubleshooting

5. Dishwasher has faulty check valve?

The check valve is just before the drain hose, underneath the dishwasher. The purpose of this valve is to allow water to drain but not come back into the dishwasher. Take off the drain hose from the dishwasher and inspect it for clogs. Make sure the valve is free of debris and opens properly.

6. Faulty drain pump on dishwasher?

If your dishwasher is still filling with water and there are no blockages in the drain system, the pump may need to be replaced. Test the drain pump with a multi-meter to be sure it is working properly.

Water is left in the dishwasher filter area?

The normal amount of standing water in the dishwasher filter region midway up the filter area is about half way up to the top of the filter area. When you empty your dishwasher filters for routine cleaning, you may notice this water. Water is kept in the area to keep the seals from drying up. When you begin your next cycle, a little amount of water is removed and replaced with fresh water. This is normal.


Whirlpool Dishwasher Fix From Not Draining

See also  5 Reasons Why A Dishwasher Overflows Onto The Floor


Fix a Dishwasher Not Draining Cleaning


Whirlpool Dishwasher Not Draining – YouTube

Summarized dishwasher troubleshooting: If you are experiencing a Whirlpool dishwasher that won’t drain, there are multiple causes for this problem.

1. The first is the filter may be clogged with debris. This may be remedied simply by cleaning any items that are blocking it and making sure all other facets of your dishwasher are in good working order.

2. An obstruction or a bend in the dishwasher drain hose could have occurred which prevents drainage.

3. The garbage disposal shares the drain with the dishwasher drain. If the garbage disposal has food stuck in it, this could cause the dishwasher to not drain out the water. Run the garbage disposal to fix this issue.

4. The other issues are the check valve and the main dishwasher drain pump. Check all aspects of the dishwasher and you will find out the solution for why your Whirlpool dishwasher will not drain out the water.

Need more help? Check the Whirlpool service and help website or ask us a question about your Whirlpool dishwasher below. Asking us a question? Please let us know the model number of your Whirlpool dishwasher so we can begin troubleshooting the issue for you.


1 thought on “6 Ways To Fix Whirlpool Dishwasher That Will Not Drain”

  1. Washer won’t drain.
    I’ve check everything, it seems to not be getting power to the drain pump. Any suggestions on how to troubleshoot this, or where I should start?

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.