Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Have the Samsung model WA5471/WA5451 top loading washer that is around 7 years old. Never had any issues until yesterday. Put in load of laundry and, in a few minutes, I heard the bells I recognized when a load is unbalanced. I go into laundry room, and there is water on the floor everywhere. No code was displayed. Water was coming from underneath washer. The amount of water dispersed looked to be where washer was continuously trying to fill. Is this a water pump issue?
My Samsung washer will not spin, will not show or start spin test or moyor test rpms.
If you open the washer, look at the bottom of the tub where the chrome or white cover is in the center, pry it off and remove the bolt to lift off the center piece. Underneath that you will see the gray metal, which has soap scum on it, as well as pieces of it falling apart. It’s a poorly designed part, that is disintegrating. I cleaned every thing the best I can. Helped for a short while, now it’s back again.
My samsung wa5471 will not drain and go into spin mode. Was told it was possibly the control board. Just wondering your opinion. Thank you.
My Samsung washer: mode wa5451anw/xaa is having a problem. It will not complete a wash cycle. Instead, if I set it to a normal wash cycle it shows about 50 minutes on the board. Then it will count down to 3 minutes left. It will then jump back up to 18 minutes and start filling the basket up with water for the rinse cycle again. It will repeat this over and over, never completing the cycle. Any suggestions?
Ok…
There was a small but semi steady stream of water coming out the ball like next to the soap tray…now I am not getting any water into and keeps saying 4c..but check my lines all seem fine even checked it both cold and hot…
Now what
Samsung WA5471 stopped mid cycle when clothes added. Now all it will do on a restart is give the error code PE. I checked the clutch motor resistance and it is at spec. Can this motor still be faulty?