Haier Washing Machine Front Loader General Error Codes

Haier washer giving an error code? Here is information that will assist you in identifying what may be making your Haier front load washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Haier washer specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

haier washer error codesHaier Washing Machine Error/Fault Codes – Probable Fault Identifier

Haier Washing Machine Fault Codes

Haier Washing Machine Error Code: bLoC PunP
Fault Condition: Water not draining out / No drain
Repair or Troubleshoot: Check for clogs in the house drain for the washer, Be sure there are no clogs or bends in the the washer drain hose, Check the filter in the drain pump for a clog, If the drain pump is not working it will need to be replaced.
Replace or Repair Parts: Drain pump

Haier Washing Machine Error Code: no tAPS
Fault Condition: Not filling up with water
Repair or Troubleshoot: Make sure water supply valves behind the washer are fully open, Check for a siphon problem, If the water inlet valve assembly is bad then replace it.
Replace or Repair Parts: Water inlet valve assembly

Haier Washing Machine Error Code: Err1
Fault Condition: Washing machine door error detected = Not closed
Repair or Troubleshoot: Check that door is closed, Cycle power to the machine, Check wiring to door lock, Check PCB.

Haier Washing Machine Error Code: Err2
Fault Condition: Water has not drained from the washer
Repair or Troubleshoot: Check drain pump, Check wiring, Check water level sensor, Check connections to water valve & PCB.

Haier Washing Machine Error Code: Err3
Fault Condition: Detected washer temperature sensor error
Repair or Troubleshoot: Check connections to washer temperature sensor, Check temperature sensor.

Haier Washing Machine Error Code: Err4
Fault Condition: Washer heating element fail
Repair or Troubleshoot: Clothing overload of washer, Check washer heating element, Check wiring, Check thermistor.

Haier Washing Machine Error Code: Err5
Fault Condition: Water level not reached expected level
Repair or Troubleshoot: Check for leaks, Check water supply, Check water inlet valve, Check wiring to water inlet valve, Check wiring to PCB & PCB.

Haier Washing Machine Error Code: Err6
Fault Condition: Washing machine motor speed incorrect
Repair or Troubleshoot: Check motor connection, Check motor tachometer unit, Abnormal load condition, Check wiring to motor.

Haier Washing Machine Error Code: Err7
Fault Condition: Motor speed error detected
Repair or Troubleshoot: Unplug washer, reconnect loose wires on drive motor, Replace the wire harness if faulty, If wire harness connection good then replace the drive motor.
Replace or Repair Parts: Drive motor

Haier Washing Machine Error Code: Err8
Fault Condition: Washer has overfilled with water
Repair or Troubleshoot: Unplug the washer, Replace the water inlet valve assembly if the washer keeps filling when unplugged.
Replace or Repair Parts: Water inlet valve assembly

Haier Washing Machine Error Code: ErLC
Fault Condition: Door lock has failed
Repair or Troubleshoot: Unplug the washer, Reconnect loose wire harness connections to the door lock assembly, Replace the wire harness if damaged, If the wire harness is okay, replace the door lock assembly.
Replace or Repair Parts: Door lock assembly – Wire harness

Haier Washing Machine Error Code: ErUL
Fault Condition: Door lock failure
Repair or Troubleshoot: Unplug the washer and reconnect any loose wire harness connections on the door lock assembly, Replace the wire harness if damaged, If the wire harness is good, replace the door lock assembly.
Replace or Repair Parts: Door lock assembly – Wire harness

Haier Washing Machine Error Code: EUAr
Fault Condition: Communication failure between display board and power board
Repair or Troubleshoot: Unplug the washer, reconnect any loose wire harness connections between the display board and the power board, Replace the wire harness if bad, If the wire harness is good, replace the display board, If the problem does not go away then replace the power board.
Replace or Repair Parts: Display board – Power board – Wire harness

Haier Washing Machine Error Code: Unb
Fault Condition: Unbalanced wash load
Repair or Troubleshoot: Redistribute the washer clothing load and restart the wash.

Haier Washing Machine Error Code: PF
Fault Condition: Voltage is less than 93 Volts AC
Repair or Troubleshoot: Unplug the washer and inspect the power cord, If the power cord is okay, have electrician fix power supply to the washing machine.
Replace or Repair Parts: Power cord

Haier Washing Machine Error Code: CLrF
Fault Condition: Too much detergent suds
Repair or Troubleshoot: Use the right amount of high efficiency HE detergent to not have excessive suds.
Replace or Repair Parts: HE detergent

haier washer error codes listHaier washer error codes list

If your Haier Washing Machine Error Code is not listed here, check Google or YouTube to find the exact error code your Haier washer is displaying.

Haier washer partsNEED HAIER WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.


Haier Washer Error Codes Video

Need assistance with finding an error code for your washer? Ask your question below and we will be happy to assist.

7 thoughts on “Haier Washing Machine Front Loader General Error Codes”

  1. My washing machine lock is enabled without the door closed…?

    I Don’t know what to do again,cuz even the emergency plug didn’t work

  2. Hi just wondering My washing machine has just randomly thrown up the FC2 code and the washer has stopped working and won’t reboot, what can I do to reset the entire machine?

  3. I’m also having this same issue but not the Daewoo company.
    Mines the Panasonic Model NA-16VX1.
    It does double thump but nothing to do.
    It just does this like I checking everything.

  4. Temperature sensor plug might be loose or sensor is no good or the circuit board is no good . That’s what it said on another site .my machine has the same fault code ,thinking it could be loose plug as the concrete weight come of the bottom tub and knock the drain hose of when it did . It was working for a few weeks after I use a full tube of adhesive sealant to glue the concrete weight back on

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.