Here is information that will assist you in identifying what may be making your Kenmore washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Kenmore specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.
KENMORE Washing Machine Error/Fault Codes – Probable Fault Identifiers
Kenmore Washer Front Load Error Codes
F/H
Not filling
F/02
Takes a long time to drain
F/05
Water temperature sensor
F/06
Motor tachometer
F/09
Overflow
F/10
Motor control board overheated
F/11
Serial communication error between main electronic control board and motor control board
F/13
Dispenser circuit error
F/14
Main control board EEPROM error
F/15
Motor control board error
Sud
Excessive suds
F/dL
Door lock error
F/dU
Door unlock error
If your Kenmore Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Kenmore is displaying.
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Patricia,
The Kenmore E6 error code that shows on the washer indicates an issue with the clutch or the main control unit.
It can be the wire harness is not connected correctly to the clutch motor as well.
Check all connectors make sure everything is connected properly.
-RR
I have a Kenmore elite it’s read E6 an stops runnin. Do u no what that means
I have a kenmore elite top load washer with an error code of Cl blinking
can you please tell me what this code means
Roger Hinshaw,
The error code “OE” on your Kenmore washer means a drain error. This error displays if the washer is draining too slow or if not fully draining within 10 minutes. The drain pump and filter will need to checked and cleaned.
-RR
What is OE error code on Kenmore Elite Washer?
Marina,
Can you explain further? When you say the washer does not turn off automatically, please describe in detail. Does the panel stay on or does the washer actually keep washing? Filling? Buzzing? Draining?
-RR
What to do if the machine KENMORE 110.4472 does not turn off automatically.