Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
I have this top-load washer. It keeps repeating the spin cycle and then finally end up with DC error. We had replaced the Washer Dampers, PCB-Main, Motor Hall Sensor, MEMS sensor, upper harness (DC93-00054C) and lower Harness (DC93-00055C) but the problem kept coming back. I will replace the clutch assembly next. Have tested the procedure to clear the EEPROM (The unit needs to be on, press Delay Start Key and Power key at the same time), IT DOESN’T WORK! It looks like Samsung products are not well tested, they just release to us Beta testers at our expense.
Mike,
When you state it leaks from the top, is it overfilling? Water is too high and splashing over? Too many clothes and water set on high fill? Can you tell us how the washer is leaking from the top? We can go from there.
-RR
I have a washer that appears to be leaking from the top? I see water on the floor in the front and back…I took it apart but do not see a true seal?? I took the top ring off and thought there would be a seal there…any advice?
Sylvia,
You may have a wire harness that is loose behind the control panel. Unplug washer, remove screws holding panel on and check all wire harnesses to be sure they are secure. Sometimes the vibration of the washer itself can rattle the harnesses off or they could be damaged. If the wire harnesses are tight, in place, and secure, then check control board for burns or obvious signs of a problem. The board can cost around $190 US dollars. If the board is bad, yes it is something you can replace yourself. Just be absolute sure it IS the board before you buy. Watch a few YouTube videos to see how everything comes apart. Here is the parts list with pricing for your Samsung washer (all parts for the top control area). MAKE SURE THE SAMSUNG WASHER MODEL NUMBERS ARE THE SAME AS YOURS BEFORE YOU BUY.
-RR
Samsung Washer WA50F9a8D center buttons on control panel are non-responsive. Turns on fine, can adjust cycle using turn dial, and can start and run okay. But can’t adjust water temp, add extra rinse, etc. Need to replace mother board? If so, what is cost and can I do this myself?
Karl,
May sound too obvious but is water on? Both hot and cold? Water hose crimped? Are connections to washer correct and not crossed? Try using a different cycle and use only cold or hot water and see what happens.
-RR
Samsung Wa5451 Top Load washer. We moved it to paint the floor, moved it back hooked it up and now water will not fill. Checked inlet screen and all clear. Puzzled. Please help.