Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Ardie,
Check the water fill level sensor to be sure it is not clogged or is not malfunctioning. This fill level sensor is what stops the water at the appropriate water level.
-RR
I did check all of those (power, door, filters and water supply. I also checked the valve coils and found the hot water valve coil is open. So I swapped it with the Bleach valve coil (that is good) and ordered a Hot Water valve.
Now the washer fills up to about 2 or 3 inches and does the wash. It won’t fill any further than that.
Ardie,
Samsung Washer NF error code means NO FILL…
Verify the door is tightly closed.
Verify the washer is plugged in and powers on. If it does not power on, check the fuse or reset the circuit breaker.
Verify the debris filter is not clogged.
Check water supply valves at back of washer for proper operation, no clogs, and proper voltage.
-RR
Got a Samsung WA5451 top loading washer in 2012 and it’s been working good since then – except recently it has been getting the nf fault. It starts to fill at the beginning but then it stops and goes around slowly like it does when filling – but it doesn’t fill. I’ve checked the supply, the hoses, the hose screens, the input screens. When I put it in the Quick Test Mode and do the Water Valve Test this is what I get. Cold – cold water only. EcoWarm – cold water only. Warm – no water. Hot – Hot water only. Extra Hot – Cold water only. At this point I haven’t checked out the water valve coils.
Thanks RR. You are correct. It was the discharge hose. It disconnected all on its own. The spring clamp feels very weak. I am replacing the clamp and the other 3 that are similar with screw clamps.
David,
That would mean the drain hose is not connected or the drain pump itself has an issue. Also check the front drain filter as it may not be connected or missing.
-RR
My Samsung washer will not hold water anymore. I can manually pour water into the tub with a bucket and it immediately flows onto the floor.