Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
I appreciate all the informative inforinformation. I have a Samsung WA6L5471ABP/WAS 001 follows washer. I am having problems with my washer not compleying the spin cycle. After rinse cycle it goes into spin for 1 minute. The drum doesn’t spin then it starts to fill with water and starts the rinse cycle again.
Please help with any information or advice.
Samsung WA5471 washer does not spin.
When I enter service mode I cannot perform spin test.
It does nothing.
I get error code F 35.
The first letter is a E without the top vertical line.
My top load Samsung washing machine wa5471ab
Every time it comes up with dc unbalanced load open lid move around clothes and start again and it will come up again.
I’ve done the spin test and it spins fine with nothing in it.
Is there a damper or sensor that tells it it is unbalanced?
Audra,
If the Samsung washer will NOT DRAIN after you performed the previous steps of cleaning screens and hoses…
The next step is to get to the drain pump itself to see if it is clogged.
-RR
My Samsung washing machine stopped with 13 minutes left on the cycle.
It makes a click sound when you try to start it but does nothing.
This happened before and I fixed it but not this time.
I cleaned the screens and hoses.
Thought it was fixed and started a load and now a washing machine full of water and clothes again.
Will not drain, checked drain hose.
I’m not sure if I have the wa5471 or 5451. We have had for over four years but quite a while ago the washer just started making lots of squeaking, especially when it’s just slowly agitating. Clothes come out fine but noisy! Any thoughts on what the issue might be and how to fix?
Our washer is leaking just a tiny bit from the bottom at the very end of the cycle.
Our model number is: WA56H9000AP/A2.