Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Samsung WA5451AN owner here. Foolishly put a single shirt in the washer, then left. So, the machine was off when I got home. The tub is tilted to the left now, seemingly permanently. I have run the machine with a couple of small loads and ran a rinse/spin cycle while empty. The tub won’t right itself. No codes are appearing and it is, believe it or not, washing normally. Research tells me that this machine doesn’t have a calibration mode. That seems to be what is needed!
I have the same problem with mine interested to know if you get yours fixed. And what fixed it?
Have a wa5471 with a pe1 code. Replaced the clutch motor and board. What is happening is it will start as if it’s gonna operate but then the clutch motor just starts rotating around and around. What could be causing this after replacing it and the board?
Troy, did you figure out what was wrong with your washer, as I am having the same issues.
It will spin just fine with the spin test, but I cannot get the load balanced.
I have a WA5471 top load washer and the lid will not stay up when loading and unloading clothes. Is there a tension clip for the hinge. I can’t see what holds it up or if any part of the hinge is missing. Is there a diagram for that part.
Thanks Doug
My wa5471 keeps repeating spin cycle and after that it keeps filling up
Tina,
Did you solve the issue?
Because I have the same issue as yours.