Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
Andrew Glenn,
Have you made sure power is getting to the washer?
If so, check the wiring on back.
If rear wiring is okay then remove the control board to see if there are loose wire harnesses or possibly a burnt board.
-RR
I have a Samsung wa5451 and a quarter got stuck in the agitator. The whole control screen went out and I have no sign of power. I got the quarter out and spun the agitator, but machine will not power on. Do I need to buy a new control board?
Brandi Gerling,
Samsung washer error code 8E means MEMS sensor failure.
Check the wiring first to be sure it is secure, if not replace the MEMS sensor.
-RR
My Samsung washer is giving the 8E code what does this mean and how do I fix this?
Sophia,
If your Samsung washer is getting the DS or D5 error code, The washer thinks the lid or door is open or unlocked during the wash cycle. Either close the door, or check that the door switch/lid switch is working properly and installed correctly.
-RR
I just replaced the lid lock on my Samsung Washer and now I get a DS error code. What do I need to do now?
Holly West,
The lint issue may be because of something that was washed earlier and the washer did not wash out all the lint. Try washing empty in “Clean” mode and see if that fixes the issue.
If the washer is leaking a small amount of water from the front left, you may have a loose or damaged water line. Check inside the machine to find the leaking hose, connector, or component. Replace parts as needed.
-RR