Is your Samsung Top Load Washer WA5471 or WA5451 not spinning, not starting, leaking, getting error codes, not draining, flashing, wrong temp, not filling?
We have all the ways to troubleshoot your Samsung top load washer here. Remember, if you have any questions about repairing your Samsung top load washer, please leave a comment below describing your issue and we will be happy to assist troubleshooting.
Samsung top load washer troubleshooting
Below are many different troubleshooting diagrams, electrical schematics, water flow diagrams, eeprom check, board input test modes, continuous run mode, fast time down test mode, service modes, error codes, diagnostic test check modes and more. These are meant for troubleshooting on the SAMSUNG TOP LOAD WASHER WITH MODEL NUMBERS WA5471 or WA5451 ONLY.
Samsung top load washer WA5471 WA5451 troubleshooting
Once you find the issue with your Samsung Top Load Washer
we can help you find the replacement parts you need for less!
Samsung top load washers replacement parts
___________________________________________________________
Board input test mode
___________________________________________________________
Continuous run mode
___________________________________________________________
Cycle count check mode
___________________________________________________________
Diagnostic code check mode
___________________________________________________________
eeprom clear check for Samsung top load washers
___________________________________________________________
Fast time down test mode
___________________________________________________________
Problem checking of PCB
___________________________________________________________
Samsung service mode
___________________________________________________________
Samsung top load quick test mode
___________________________________________________________
Samsung top load washer error codes 1
___________________________________________________________
Samsung top load washer dc error, unbalanced, fix
___________________________________________________________
Samsung top load washer error codes 2
___________________________________________________________
Samsung troubleshooting no water fill, will not lock, will not unlock
___________________________________________________________
Samsung troubleshooting wont drain, noisy, wrong water temp, buttons do not respond
___________________________________________________________
Samsung wring diagram schematic WA5471 WA5451
___________________________________________________________
Troubleshooting wont spin, leaking, will not start – Samsung washer
___________________________________________________________
Water flow diagram Samsung top load washer
___________________________________________________________
Samsung WA5451 Top-load Washer In Action
___________________________________________________________
How High Efficiency HE Top Load Washers Work
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Frigidaire, GE,
Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Do you have suggestions or questions about your Samsung Top Load Washer? Please leave a comment below.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
My Samsung WA5471 top loader washing machine is leaving a film of lint on my clothes. It never did in the beginning. Also there is a small discharge of water left on the floor on the front left side of the machine.
David Price,
How often does this happen? How old is your Samsung washer? We understand you say a slimy flaky grey substance… But is the substance similar to oil at all? lLike the oil used to lubricate parts? Is the grey flakes the material that is sprayed onto there inner wash tub? Have a look inside and see if any paint or substance may be chipping off the walls of the washer tub.
-RR
I also have a problem with the “gunk” that comes out after every cycle. It is a slimy flaky grey substance. I have tried multiple runs of the Pure cycle with vinegar and tried Affresh cleaning tablets. The stuff just keeps coming. Any suggestions?
Thanks in advance.
Ok, I have now replaced the vibrations sensor, and the 4 suspension rods, and I am still getting DC error!!! What else could this be. This machine is driving me nuts!
Please help.
Brandon
machine wa5471abp top loading. I think I tried two different settings. It doesn’t even give me an error code
Josh,
Samsung uses the 3E error code to indicate a drive motor tach fault.
Try…
Unplug the washer for 2-3 minutes to reset.
If unplugging did not work… Check Wire Connections On Drive Motor, Check Wire Connections On Control Board, Check Hall Sensor
-RR
Thank you so much for responding.
No matter how many times I redistribute (or how over careful I am in doing so), it will not finish the cycle, and get another DC error. Is there a way to test to see if it is the vibration sensor? Or anything else I can do.