Daewoo Washing Machine Error Fault Codes

Daewoo Washer Has An Error Code? Here is information that will assist you in identifying what may be making your Daewoo washing machine display an error code. Identifying what the error or fault code is, will help you to repair your washer. The Daewoo generalized error fault codes below are to give you an “idea” as to what part is at fault. These Daewoo error codes may not apply to all Daewoo washers. You may have to do further troubleshooting to find what may be causing the fault for that specific part. For more assistance finding the exact error on your washing machine, please ask a question below.

Daewoo washer error codesDaewoo washer error codes

Daewoo Washing Machine Error Fault Code = E2
Fault Detected: Water Overfilling Error
Washer Has Detected: Water has overfilled and the error code is displayed
Check / Repair / Fix = Water inlet valve – Drain pump – Pressure switch – Level sensor

Daewoo Washing Machine Error Fault Code = E5
Fault Detected: High Voltage Error
Washer Has Detected: Higher Voltage / Clothing jammed between drum / Gasket
Check / Repair / Fix = PCB

Daewoo Washing Machine Error Code Message = E6
Fault Detected: EMG ERROR
Washer Has Detected: The laundry is jammed between the gasket and the drum… Rearrange.
Check / Repair / Fix = The motor is faulty. Change the motor.
The PCB control board assembly is faulty. Change the PCB electronic board.

Daewoo Washing Machine Error Fault Code = E7
Fault Detected: Directional Error
Washer Has Detected: The motor / drum detected moving in the opposite direction
Check / Repair / Fix = Hall sensor

Daewoo Washing Machine Error Fault Code = E8
Fault Detected: Washer Motor Error
Washer Has Detected: Main drive motor fault
Check / Repair / Fix = Motor connection block – Abnormal loading

Daewoo Washing Machine Error Fault Code = E9
Fault Detected: Pressure Sensor Error
Washer Has Detected: Error with the pressure switch or level sensor
Check / Repair / Fix = Wiring to level sensor – Level sensor

Daewoo Washing Machine Error Fault Code = H2
Fault Detected: Wash Temperature Sensor
Washer Has Detected: Washer thermistor or temperature sensor error
Check / Repair / Fix = Connections to wash temperature sensor – Temperature sensor

Daewoo Washing Machine Error Fault Code = H4
Fault Detected: Overheating Washer Heating Element
Washer Has Detected: Washing machine is overheating
Check / Repair / Fix = Water level – Temperature sensor

Daewoo Washing Machine Error Fault Code = H6
Fault Detected: Washer Heating Element Failed
Washer Has Detected: Heating element is not heating
Check / Repair / Fix = Washer heating element – Wiring – Thermistor

Daewoo Washing Machine Error Fault Code = H8
Fault Detected: Heater Overheating / No Water Washer
Washer Has Detected: Heating element working with no water in the washer
Check / Repair / Fix = Water level – Wiring – Thermistor – PCB

Daewoo Washing Machine Error Fault Code = IE
Fault Detected: Water Inlet Error – Washing Machine Did Not Fill With Water
Washer Has Detected: Washing machine not detecting any water incoming
Check / Repair / Fix = Wiring to water inlet valve – Water valve – Drain pump – Pressure switch – PCB

Daewoo Washing Machine Error Fault Code = LE
Fault Detected: Washing Machine Door Open
Washer Has Detected: Washing machine detected door as open or not locked
Check / Repair / Fix = Close door – Door lock switch – Door latch – PCB

Daewoo Washing Machine Error Fault Code = OE
Fault Detected: Water Has Not Drained From The Washer
Washer Has Detected: The washing machine failed to drain water
Check / Repair / Fix = Drain pump – Wiring – Water level sensor – Connection to water valve

Daewoo Washing Machine Error Fault Code = PEF
Fault Detected: Filter Is Detected As Blocked
Washer Has Detected: Drain filter blocked
Check / Repair / Fix = Clear blockage from filter

Daewoo Washing Machine Error Fault Code = UE
Fault Detected: Washer Load Imbalance
Washer Has Detected: Unbalanced load and the washing machine has failed to spin
Check / Repair / Fix = Resort clothing load and start wash again

find model number of washing machineFind model number of washing machine

daewoo washer error codes F and LEDDaewoo washer error codes “F” and LED

If your Daewoo Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Daewoo is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted
Washing Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer? Ask your question below and we will be happy to assist.

Leave a Reply

48 thoughts on “Daewoo Washing Machine Error Fault Codes”

  1. I change a drain pump and washer work once and the next time as soon as I press the power button the pump runs and does not stop even during any cycle

  2. Wende Esposito

    I have an 0E code on my Daewoo Washer and I cannot open door.
    How do I override this?

  3. I have a Daewoo DWD-MH1011.
    I am having a problem with starting machine whenever I press the start button the machine sounds a two second beep beep.
    Machine is not starting at all, just beeping.

  4. DIY Project Help Tips

    Shawly,
    DAEWOO WASHING MACHINE ERROR CODE = dE
    This error shows if the door lock is not set to open or close when the door lock solenoid is operated more than 10 times.
    This error is cleared when the door is open or possibly the solenoid is tested to be in working order.
    -RR

  5. I got an error code dE on my DAEWOO DWF 320L Washing Machine.
    The machine is not working… What could be the problem?

  6. I have a problem with my mashing model Daewoo DWD-F1013 concerning the error OE.
    I read the Manual and I cleaned the drain filter but everytime I close it the same error comes up.
    How can I check the drain hose knowing that from outside everything is good and not broken and the high it 70cm/80cm.
    If I let the drain filter open the mashing spin normal.

  7. I get no errors but the machine shuts down and the water is still in there.
    I have to drain and then restart the cycle.

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.