Bosch Washing Machine Error Fault Codes

Here is information that will assist you in identifying what may be making your Bosch washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Bosch specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

Bosch Washing Machine Error Codes

BOSCH Washing Machine Error/Fault Codes – Probable Fault Identifiers

Bosch Logixx WAS Series Washing Machine Error Codes

F16
Door lock error

F17
Inlet valve error detected

F18
Drain error detected

F23
Anti flood device has been activated

F34
Door lock error

F42
Motor fault

F43
Motor fault

F44
Motor fault

Bosch WAE Range Washing Machine Fault Codes

F16
Door lock problem

F17
Inlet valve

F18
Drain pump

F21
Motor

F23
Anti flood system activated

Bosch WFP Range Washing Machine Fault Codes

F01
Water intake timeout

F02
Heating timeout

F03
Draining timeout

F04
Motor fault

F05
Uncontrolled motor startup

F06
Short on NTC Detected on hot water intake

F07
Open circuit NTC Open circuit wiring

F08
Door open when program started

F09
Unexpected heating

F10
Communication error

F11
Overheating

F12
Short circuit

F13
Mains voltage too high

F14
Mains voltage too low

F15
Faulty temperature sensor on motor PCB

F16
Faulty rinse sensor Displayed only in test

If your Bosch Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Bosch is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.

Leave a Reply

33 thoughts on “Bosch Washing Machine Error Fault Codes”

  1. DIY Project Help Tips

    Lauren,
    Bosch Washer Error Code E23 = Aquastop activated
    The fault connected with “Error code E23 Aquastop activated” can’t be rectified by itself according to Bosch.
    You can research the “Aquastop activated” and see what is needed to clear the error.
    -RR

  2. I have a Bosch Series 6 Varioperfect washing machine (brand new a year ago) which flashes error code E:23 and beeps on every setting and has locked with my clothes inside and does not start. Any advice?

  3. Bosch Error E81 folowed by E00.
    My 2yo Bosch washing machine flashed this error and no one at the bosch helpline could tell me what it was. BOSCH tech called back after following up (he didnt know either), E81 error indicates I-Dose Sensor error.
    He is ordering sensors prior to coming out.
    Hope this helps anyone who is also searching this error (very frustrating)

  4. I have problem with my washing machine waw32640eu.
    When I start program I get 2 error codes E81 and E00.
    After that the machine works fine..
    What does it mean?

  5. DIY Project Help Tips

    Mike and Sara,
    If your Bosch washer has a front debris drain pump filter, clean it out. If not the pump may be clogged or jammed by a foreign object. Also check the drain hose to be sure it is not crimped or bent and therefore not letting the washer drain. What is the model number of your Bosch washer?
    -RR

  6. Mike and Sara

    I have a Bosch front loader that occasionally shows a error code F18. Yes it understand that this could be a pump problem, can you advise if this could be a filter that allows drainage that is slowing the draining and if i can find a filter and clean it prior to getting a service person out?

  7. DIY Project Help Tips

    Caz,
    E00 error code on Bosch washing machine usually indicates a bad control board in the washer. This page on RepairClinic will assist you if you need the control board. Bosch washer parts. Be sure you order the correct part for your Bosch Maxx 6.
    -RR

  8. Does anyone know what error code E:00 is on my Bosch maxx 6 washing machine? Can’t seem to find what this error relates to… Just switched it on and the error code on. It’s not mid cycle and the door is opening… I have cleaned out the drain. Any ideas?

  9. DIY Project Help Tips

    Kiavoush,
    Are you sure the error code is E33 on your Bosch washer? Is it possibly E3? What is the model number of your Bosch washer?
    -RR

Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.