Here is information that will assist you in identifying what may be making your Amana washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Amana specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part. First try the solutions suggested here or visit www.amana.com/help for assistance and to possibly avoid a service call.
Amana Washing Machine Error/Fault Codes – Probable Fault Identifiers
“Sd”
(Excess suds)
F8 followed by E1
(water supply error)
F9 followed by E1
(drain pump system error)
F5 followed by E2
(door will not lock)
F7 followed by E1
(motor drive error)
“rL”
(remove load)
Washer making error beeps
Door has not been opened and closed for at least 3 cycles
Washer beeps when HOLD TO START is touched
Door not closed
F# E# code other than as described above appears in display
System Code Error
“nt” (interrupted)
Cycle was paused or cancelled
Clean Washer LED flashing at end of wash cycle
The washer has run 30 wash cycles and is indicating a reminder to run the Clean Washer cycle
If your Amana Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Amana is displaying.
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.
Written by Keith Schneerer
Certified Appliance Tech · Founder, RemoveAndReplace.com
Keith has spent 30+ years repairing machines, starting as a military mechanic and later maintaining food processing equipment before moving into appliance repair. He founded RemoveAndReplace.com to share field-tested repair advice.
More about Keith →
William Swartz,
Fault codes related to the Amana washer motor and capacitor is Error F7 E6.
The main problem that happens with the washer motor or capacitor is the washer fills but will not wash or spin.
The capacitor or motor is at fault when you have the error code F7E6 or f7 e6.
-RR
Amana washing Machine NTW4750YQ1 Error Code f7e6?
Bridgette,
Amana Washer = F9 E1 error code will show if the washer is not draining properly.
Check that the washer drain hose is not blocked.
Make sure the drain hose height does not exceed 96″.
Check and clean the drain pump filter of foreign objects.
Check connections from tub to air trap.
Check air trap to pressure hose.
Check pressure hose to water level sensor.
Check that there is not excessive suds in the washer.
-RR
I have an Amana washing machine. I am getting error code f9 E1. How to fix?
Amana Washer has code rP. It is a model from 1992 – LW 4603 or LW 9203 on use and care guide. It starts washing, then the code appears and washing stops. Finally could get it to finish thru the spin and rinse cycle. When done, code still appears on display.
Amana Front Loading washing machine 8 years old. Come to start cycle push button and after 30 seconds machine clicks and light turns red beside door lock. I noticed as well when setting my time for the wash cycle i used to have 29 minutes as an option and now i do not it shows 30 minutes.
Bobbi Link,
Your Amana washing machine is draining too slowly…
Things to check:
Check the drain hose and make sure it is not bent or clogged.
Check/Clean Drain Pump Filter.
Check for the Drain Pump to be sure it is in working condition and not clogged or jammed.
Also… Remove the filter panel on bottom front of washer.
The filer is inside, simply unscrew if from the pump and clean it out.
-RR