LG Washing Machine Error Codes – Washer Fault Codes







LG washer error? Here is information that will assist you in identifying what may be making your LG washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The LG specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.

LG Washing Machine Error Codes

LG Washing Machine Error/Fault Codes – Probable Fault Identifiers

LG Washing Machine Error Code = tE
LG Washer Error = Heating Sensor Error
CHECK / REPAIR / FIX = Check wiring connections on the drum thermistor (temperature sensor). It should measure about 40,000ohms at 85 degrees. If defective then replace it. Check the heating element for damage. If the heating element is defective then replace it.






LG Washing Machine Error Code = LE
LG Washer Error = Drive Motor Locked Error
CHECK / REPAIR / FIX = Check the wire harness connections on the motor and the hall sensor (tachometer). Repair any wiring issues. If the wiring connections check good then check for damaged motor components. Replace if needed. If motor is good the replace the hall sensor.

LG Washing Machine Error Code = EE
LG Washer Error = EEPROM Error On Electronic Control Board
CHECK / REPAIR / FIX = The EEPROM on the control board is corrupted. Clear the code by unplugging the washer for 10 minutes. If the code doesn’t go away when you restore power then replace the main control board.

LG Washing Machine Error Code = PF
LG Washer Error = Power Fail
CHECK / REPAIR / FIX = A power failure occurred during the cycle.

LG Washing Machine Error Code = IE
LG Washer Error = Inlet Water Supply Error
CHECK / REPAIR / FIX = The initial water level not reached in 8 minutes. Check the inlet water valve. If the valves are bad replace the inlet water valve assembly. If the water valves check good then replace the main electronic control board.

LG Washing Machine Error Code = UE
LG Washer Error = Unbalanced Load
CHECK / REPAIR / FIX = Redistribute the clothes in the washer. Make sure the washer is properly leveled.

LG Washing Machine Error Code = OE
LG Washer Error = Draining Error
CHECK / REPAIR / FIX = Washer did not drain within 10 minutes. Check the washer drain for a clog.

LG Washing Machine Error Code = FE
LG Washer Error = Water Over Flow Error
CHECK / REPAIR / FIX = The drain pump runs constantly when the FE error code is displayed. Check the inlet water valves to see if they shut off the water supply properly after the washer is filled.









LG Washing Machine Error Code = PE
LG Washer Error = Water Level Pressure Sensor Error
CHECK / REPAIR / FIX = Check wiring between the water level pressure sensor and the main control board. If the wiring is good then replace the water level pressure sensor

LG Washing Machine Error Code = dE
LG Washer Error = Door Open Error
CHECK / REPAIR / FIX = Check the door for blockage. If the door closes properly then check the door lock switch assembly wiring.

LG Washing Machine Fault Codes

CL
Child lock engaged

OE
Washing machine has failed to drain the water

IE (may look like 1E)
Water fill time out – Water Inlet Valve









dE
Washing machine door detected as being open

UE
Washing machine has detected an imbalanced load

SE
Motor fault detected

LE
Washing machine motor locked error

FE
Washing machine has detected an overfill situation

tE
Water heating error detected

PE
Water level sensor fault

To clear any error press the pause button and this will normally
make it disappear and the washer will go into pause.

If your LG Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your LG is displaying.

NEED WASHER PARTS? Over 6,000 New and Discounted Washing
Machine Replacement Parts For ALL Washing Machine Models

Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.

Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.



Parts: Refrigerators, Washers, Dryers, Dishwashers
Appliance Parts for Refrigerators Washers Dryers Dishwashers



More "Do It Yourself" Tips, Tricks, Ideas, Repair:















{ 14 comments… read them below or add one }

1 Simon October 11, 2016 at 6:23 am

My washer has a SE error code.
The manual does not list this error!

Reply

2 Njogu September 24, 2016 at 6:05 am

My washing has this SE error
Motor seems ok
Advice

Reply

3 Romeo Lim September 5, 2016 at 2:20 am

My LG washer model WF-D100M/GSC displayed error code AE…. says Clutch error, can i repair it myself?

Reply

DIY Project Help Tips 4 DIY Project Help Tips September 6, 2016 at 11:11 pm

Romeo Lim,
Replacing a clutch in a washing machine is simple if you follow a guide and have the proper tools.
Just be sure that the error code is the same each time and that the clutch is what is truly faulty in your LG washer.
-RR

Reply

5 ChiChi July 7, 2016 at 8:53 pm

Why does my LG fuzzy logic top load washer show F in the display panel when it is switched on?

Reply

DIY Project Help Tips 6 DIY Project Help Tips July 7, 2016 at 10:28 pm

ChiChi,
On your LG washer, is there any other letter next to the F error like FE or OF?
Is the washer running or is it stuck and simply just shows F in the display?
What is the model number of your LG washer?
-RR

Reply

7 laura June 19, 2016 at 10:16 pm

Is there anyway to set the LG top loader back to default. Mine is not wanting to drain and we have checked all error codes.

Reply

DIY Project Help Tips 8 DIY Project Help Tips June 20, 2016 at 10:32 pm

Laura,
If it is not draining, have you checked the drain pump, drain hose, drain lines in washer, drain in wall is not clogged?
Are you getting any error codes on the LG front load washer?
Does the washer go through all cycles but when it comes time to drain… what exactly happens?
Do you hear the drain pump running or?
-RR

Reply

9 Shital March 21, 2016 at 5:00 am

My LG front load direct drive8/ 4kg Wd-14331AD washing machine always shows IE error…
Checked with the inlet pipes no issues found.
Pls help its happening always and pause the process.

Reply

DIY Project Help Tips 10 DIY Project Help Tips March 21, 2016 at 9:59 pm

Shital,
The LG washer error code ie or IE means there is an issue with the Water inlet valve assembly. Check it with a meter to be sure it is getting power. Also check to see if it may be somehow clogged and therefore not letting water into the tub efficiently.
-RR

Reply

11 worry housewife February 7, 2016 at 10:32 am

LG washer displays Fb. what does it means? I also cannot press any buttons..help!

Reply

DIY Project Help Tips 12 DIY Project Help Tips February 9, 2016 at 12:02 am

Worry Housewife,
That error is not in the database but may mean you have a DOOR lock or unlock issue. Can you supply us with the model number of your LG washing machine so we can research further?
-RR

Reply

13 Melanie Fleming February 5, 2016 at 4:34 pm

I pressed the pause button, but the error code “CL” on my LG washer is still engaged. Any other advice?

Reply

DIY Project Help Tips 14 DIY Project Help Tips February 5, 2016 at 7:05 pm

Melaine Fleming,
LG Washer Error Code CL means that your washer CHILD LOCK is ON. You can find two buttons Temp and Options in the panel. Turn ON the machine, press these two buttons together for 3 seconds and that should reset it or turn it off. The LG washer may have a small face above a lock key that is in between the wash and rinse buttons. Hold the buttons for 5 seconds and it should unlock.
-RR

Reply

Leave a Comment

{ 5 trackbacks }

Previous post:

Next post: