LG washing machine error codes. Here is information that will assist you in identifying what may be making your LG washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The LG specific error fault codes below are to give you an idea as to what part is at fault.
Fault codes for LG washing machines
LG Washing Machine Error/Fault Codes
You may have to do further troubleshooting to find what may be causing the fault for that specific part. Click the blue link next to the error code to get more details to fix the error code yourself.
TIP: To clear any error press the pause button and this will normally make it disappear and the washer will go into pause.
LG Washing Machine Error Code = tE
LG Washer Error = Heating Sensor Error
CHECK / REPAIR / FIX = Check wiring connections on the drum thermistor (temperature sensor).
It should measure about 40,000ohms at 85 degrees.
If defective then replace it. Check the heating element for damage.
If the heating element is defective then replace it.
LG Washing Machine Error Code = LE
LG Washer Error = Drive Motor Locked Error
CHECK / REPAIR / FIX = Check the wire harness connections on the motor and the hall sensor (tachometer).
Repair any wiring issues.
If the wiring connections check good then check for damaged motor components.
Replace if needed.
If motor is good the replace the hall sensor.
LG Washing Machine Error Code = EE
LG Washer Error = EEPROM Error On Electronic Control Board
CHECK / REPAIR / FIX = The EEPROM on the control board is corrupted.
Clear the code by unplugging the washer for 10 minutes.
If the code doesn’t go away when you restore power then replace the main control board.
LG Front Load Washer Error Code = CE
CURRENT ERROR
Loose Wires – Motor Fault Error – Main Power Control Board Error
Check for loose wiring – OHM motor to check if motor is good – Replace main board
LG Washing Machine Error Code = PF
LG Washer Error = Power Fail
CHECK / REPAIR / FIX = A power failure occurred during the cycle.
LG Washing Machine Error Code = IE
LG Washer Error = Inlet Water Supply Error
CHECK / REPAIR / FIX = The initial water level not reached in 8 minutes.
Check the inlet water valve.
If the valves are bad replace the inlet water valve assembly.
If the water valves check good then replace the main electronic control board.
LG Washing Machine Error Code = UE
LG Washer Error = Unbalanced Load
CHECK / REPAIR / FIX = Redistribute the clothes in the washer.
Make sure the washer is properly leveled.
LG Washing Machine Error Code = OE
LG Washer Error = Draining Error
CHECK / REPAIR / FIX = Washer did not drain within 10 minutes.
Check the washer drain for a clog.
LG Washing Machine Error Code = FE
LG Washer Error = Water Over Flow Error
CHECK / REPAIR / FIX = The drain pump runs constantly when the FE error code is displayed.
Check the inlet water valves to see if they shut off the water supply properly after the washer is filled.
LG Washing Machine Error Code = PE
LG Washer Error = Water Level Pressure Sensor Error
CHECK / REPAIR / FIX = Check wiring between the water level pressure sensor and the main control board.
If the wiring is good then replace the water level pressure sensor
LG Washing Machine Error Code = dE
LG Washer Error = Door Open Error
CHECK / REPAIR / FIX = Check the door for blockage.
If the door closes properly then check the door lock switch assembly wiring.
LG Washing Machine Error Code = CL
Child lock engaged
LG Washing Machine Error Code = OE
Washing machine has failed to drain the water
LG Washing Machine Error Code = IE (may look like 1E)
Water fill time out – Water Inlet Valve
LG Washing Machine Error Code = dE
Washing machine door detected as being open
LG Washing Machine Error Code = UE
Washing machine has detected an imbalanced load
LG Washing Machine Error Code = SE
Motor fault detected
LG Washing Machine Error Code = LE
Washing machine motor locked error
LG Washing Machine Error Code = FE
Washing machine has detected an overfill situation
LG Washing Machine Error Code = t CL
Washer needs TUB CLEAN CYCLE TO BE RUN
LG Top Load Washer Error Code = E6
MOTOR HAS OVERHEATED/FAILED – CLUTCH MALFUNCTION/ITEM STUCK
An item such as a coin or paperclip has jammed in the washer between the drum and the pulsator
If your LG Washing Machine Error Code is not listed here, check Google or YouTube to find the exact error code your LG is displaying.
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire, GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Need assistance with finding an error code for your washer? Ask your question below and we will be happy to assist.
My washer keep throwing IE code I’m not for sure what to do ?? What does this mean ..
I replace the clutch in my LG direct drive washer but it’s still telling me E6
My LG steam washer model number WM2501H *a has a code of an upside down F And an E in the normal position. Cannot find any codes to help wondering if you could
My LG turbo Washing machine won’t start.
All lights come on ok then I set the load and it shows error PE.
I have now replaced the pressure switch and it still says PE and won’t run?
My LG top load WF-HD850WM just could not start after power on. The light in the control panel is lighted and the error code show A and all the buttons do not respond except the power on/off button.
Please advise. Thank you.
I have problem with my lg wf-d100m model the screen is flagging A6 error code.
How do i fix the SE error code on my LG top loader?
We have a 2015 LG front loader washing machine and have been hearing a single beep from it every 5 mins.
When not in use and no red lights showing a problem.
Washer is working great, but want to know why it beep’s.
My washer has a SE error code.
The manual does not list this error!
My washing has this SE error
Motor seems ok
Advice
Romeo Lim,
Replacing a clutch in a washing machine is simple if you follow a guide and have the proper tools.
Just be sure that the error code is the same each time and that the clutch is what is truly faulty in your LG washer.
-RR
My LG washer model WF-D100M/GSC displayed error code AE…. says Clutch error, can i repair it myself?
ChiChi,
On your LG washer, is there any other letter next to the F error like FE or OF?
Is the washer running or is it stuck and simply just shows F in the display?
What is the model number of your LG washer?
-RR
Why does my LG fuzzy logic top load washer show F in the display panel when it is switched on?
Laura,
If it is not draining, have you checked the drain pump, drain hose, drain lines in washer, drain in wall is not clogged?
Are you getting any error codes on the LG front load washer?
Does the washer go through all cycles but when it comes time to drain… what exactly happens?
Do you hear the drain pump running or?
-RR
Is there anyway to set the LG top loader back to default. Mine is not wanting to drain and we have checked all error codes.
Shital,
The LG washer error code ie or IE means there is an issue with the Water inlet valve assembly. Check it with a meter to be sure it is getting power. Also check to see if it may be somehow clogged and therefore not letting water into the tub efficiently.
-RR
My LG front load direct drive8/ 4kg Wd-14331AD washing machine always shows IE error…
Checked with the inlet pipes no issues found.
Pls help its happening always and pause the process.
Worry Housewife,
That error is not in the database but may mean you have a DOOR lock or unlock issue. Can you supply us with the model number of your LG washing machine so we can research further?
-RR
LG washer displays Fb. what does it means? I also cannot press any buttons..help!
Melaine Fleming,
LG Washer Error Code CL means that your washer CHILD LOCK is ON. You can find two buttons Temp and Options in the panel. Turn ON the machine, press these two buttons together for 3 seconds and that should reset it or turn it off. The LG washer may have a small face above a lock key that is in between the wash and rinse buttons. Hold the buttons for 5 seconds and it should unlock.
-RR
I pressed the pause button, but the error code “CL” on my LG washer is still engaged. Any other advice?