Samsung washing machine getting an error code? Here is information that will assist you in identifying what may be making your Samsung washer display an error code. Identifying what the error or fault code is will help you to repair your washer. The Samsung specific error fault codes below are to give you an idea as to what part is at fault. You may have to do further troubleshooting to find what may be causing the fault for that specific part.
Samsung Washing Machine Error/Fault Codes – Probable Fault Identifiers
Samsung Washing Machine Fault Codes
(Newer Model Number Samsung Front Load Washers)
dL
The door was unlocked while the washer was running
dS
The door was opened while the washer was running
d5
The door was opened while the washer was running
FL
The washer failed to lock the door
Hr
Washer temperature control problem
Heater Relay Failure (on main PCB)
LO
The door will not unlock
5E or SE
Washing machine has failed to drain the water
4E
Water fill time out
ND
Water Does Not Drain From Washer
NF
Water fill time out = No Fill
dE
Washing machine door detected as being open
UE
Washing machine has detected an imbalanced load
DC
Washing machine has imbalanced load and will not spin
3E
Motor Drive Error or Hall Sensor Error
bE
Motor short error
OE
Washing machine has detected an overfill situation
LE
Water leak –Â Excessive SUDS – Bad water level switch
HE
Water heating error detected
tE
Water heating sensor (thermistor) error detected
IE
Water level sensor fault
CE
Abnormal water temperature detected
Samsung washing machine error codes list and solutions
Samsung Washing Machine Fault Codes (Older Samsung Washers)
E1
Not filling in allocated time
E2
Pump won’t empty – not draining
E3
Overflow – overfilling with water
E4
Out Of Balance (OOB) detected
E5
Water temp rising or falling too quickly
E6
Water temp rising or falling too quickly
E7
Pressure switch
E8
Temp too high on low temp washes
E9
Water leak, Water level has reduced
EA
Motor generator error
EB
Motor error
EC
Thermistor
ED
Door Open
If your Samsung Washing Machine Error Code is not listed here, check
Google or YouTube to find the exact error code your Samsung is displaying.
Samsung Washer Error Codes
Here are error codes for Amana, Asko, Beko, Bosch, Daewoo, Fisher & Paykel, Frigidaire,
GE, Haier, Hotpoint, Kenmore, LG, Maytag, Samsung, and Whirlpool washers.
Here are Washing Machine Error Codes For All Washing Machines.
Need assistance with finding an error code for your washer?
Ask your question below and we will be happy to assist.
I have a code that looks like an upside down Fe and don’t know what it means
I have a Samsung washer model# WA5471ABWXAA error code is E1 there is a digit in front of the E but not sure what it is looks like a 6 but missing part of it what does this mean I am leaning towards temp issue
Hi my Samsung top loader washer is send a code 8c and is also not draining very fast. I’ve check the drain line it seem ok.
Does anyone have any idea what wrong with it?
I have a top loading Samsung VRT. Every time we use the washer, if it’s not on a quick wash or an all cold water wash, it shuts down with a 4C code. You have to unplug and then plug in to be able to power it off. There is no kink or obstruction in the lines and no matter how long you unplug it doesn’t reset. Just keeps doing the same thing over and over
i have a Samsung washer. it is showing an error of 7e14 i have already checked all hoses and no kinks, i have reset the washer no luck, still showing the error. what do i do next.
Please help. I have a Samsung vrt top load washer and it always worked fine until one day I turned it on and when I did, it immediately powered off. It displayed a code of c6 I believe. It happened quickly. Then turned off and won’t turn back on. I’ve tried all troubleshooting tips I found online. But nothing. I did take check the noise filter and had it tested. Noticed that power is going in but not out to the main board. So could it be the noise filter? Please help , any info is appreciated .
have multiple error codes such as Uc , 2a , and 9e …I have a samsung top load vrt washer…Washer will power on but will not start any cycle due to the door will not lock… it will not even lock in quick test mode ..I have taken the whole thing apart and still no luck…i might get lucky and the door will lock and start a cycle for acoulpe of seconds but then stops again.. any advise will be helpfull .. thanks
I have a new Samsung WW85K5410ww Add Door washing machine. Worked fine for the first 3 months. Yesterday I tried putting a load through and it won’t go further then the first 3 minutes. Starts to fill with water then just stops after 3 minutes. No error code showed up however after I turn it off then on again and do Smart Check, it comes up that the Add door is open. The Add Door is definitely closed, I have checked for anything that may be jamming it or the actual door but it looks fine.
I have tried unplugging the machine, different cycles, checked the hoses etc. Called Samsung and they couldn’t help me. Any ideas?
I get f:67 error I have Samsung washing machine logixx8 pls how can I fix it
I have a front loading 9kg ecobubble wf90f5e5u4w Washing Machine. When the drum is on the ‘slow turning’ part of the cycle it does not turn.
The drum turns freely by hand and it does not give an error code it just stops the cycle.
I also slipped the belt off and the motor was not turning properly then either.
So I think it must be either the motor or the drive circuit.
The smart check function also says to check motor so I have checked connections on the motor and the main board (again it could be the motor or drive circuits at fault).
It is the induction motor type so does not have brushes it is less than two years old so a total failure of the motor seems strange (i am another who did not register the warranty so Samsung won’t honour the 10 year motor warranty).
Before spending a lot of money on a new motor any thoughts?